Products

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

POM copolymer unreinforced, medium viscosity

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

POM copolymer unreinforced, dry blend with color masterbatch green, medium viscosity for injection molding

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

POM copolymer unreinforced, medium viscosity, worldwide drinking water approvals

POM copolymer unreinforced, medium viscosity for injection molding