Products

Special compound for 3D effect painting based on PP, e.g. B. For decorative applications in the automotive exterior.

KEBABLEND / H 21.1200 PP is a functional compound based on PP with high density.

BARLOG plastics GmbH Keballoy® EP 23 is an unreinforced ABS / PC polymer blend, which is particularly suitable for the production of sophisticated chrome-plated components. It is also optimized for very good adhesion of the electroplating layer and has a wide process window.

BARLOG plastics GmbH Kebaflow® LCP MX130 is an LCP reinforced with 30% short glass fiber / mineral mixture with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 270 °C), good chemical resistance.

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PBT unreinforced, flame retardant

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

PPS functional compound for the production of plastic-bonded magnets

BARLOG plastics GmbH Kebablend® / MW 39.1500 PPA is a product based on PPA for the production of soft magnetic components. The achievable permeability is approx. 60 (at 1 MHz) and the saturation flux density is approx. 430 mT.

PPS functional compound for the production of plastic-bonded magnets

KEBABLEND / H 27.1200 PBT is a functional compound based on PBT with high density.

PPS functional compound for the production of plastic-bonded magnets

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

POM-CF20, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

POM copolymer unreinforced, medium viscosity

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR FE 161104 is a special compound based on ABS, with improved sliding and wear behavior as well as low noise when friction is paired with plastic elements.

POM copolymer unreinforced, low viscosity

POM copolymer unreinforced, medium viscosity, UV stabilized

PBT unreinforced, highly impact modified

POM copolymer unreinforced, medium viscosity, electrically conductive

PBT-GF30, PBT, 30% glass fiber reinforced

BARLOG plastics GmbH Kebablend® / WR XB 081101 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

KEBABLEND / H 38.1900 EEA is a functional compound based on EEA with high density.

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

POM copolymer unreinforced, low viscosity, laser-inscribable

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

BARLOG plastics GmbH Kebablend® / WR 01/1220 is a special compound based on POM, which combines high strength with good sliding behavior and high wear resistance, as well as electrical conductivity.

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

PEEK, unreinforced

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

KEBABLEND / WR 01/2105 is a special compound based on POM, which has very good sliding behavior and high wear resistance.