Products

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

POM copolymer unreinforced, medium viscosity

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

POM copolymer unreinforced, medium viscosity, UV stabilized

POM copolymer unreinforced, medium viscosity, optimized crystallization behavior

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

linear PPS, 30% glass fiber reinforced, impact resistant

linear PPS, 30% glass fiber reinforced, impact resistant, hydrolysis stabilized

PPS, linear, unreinforced, impact modified

POM copolymer unreinforced, dry blend with color masterbatch green, medium viscosity for injection molding

PPS-CF, PPS carbon fiber reinforced

KEBABLEND / EC FE 190106 PPS is a special compound based on PPS, which is electrically conductive.

linear PPS, 40% glass fiber reinforced, impact resistant

Plain bearing material based on PPS, PPS + carbon fiber + graphite

PPS-GF40, linear PPS, 40% glass fiber reinforced

PPS-MD60, linear PPS, 60% mineral filled, good surface quality

linear PPS, 20% glass fiber reinforced, laser weldable, natural

PPS, cross-linked, GF 40, with improved hydrolysis resistance for applications in the automotive engine compartment.

PPS, cross-linked, reinforced with 30% high-performance carbon fiber. For extreme strength and rigidity even at high temperatures. Very good wear resistance in sliding and friction applications.

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

linear PPS, 40% glass fiber reinforced, easy flowing, reduced burr formation

POM copolymer unreinforced, medium viscosity, worldwide drinking water approvals

POM copolymer unreinforced, medium viscosity for injection molding