Products

Polyester elastomer, Shore D35

TPE-S, Shore A40, black

TPE-S, Shore A80

TPE-S, Shore A60, natural

TPE-S, Shore A80

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

BARLOG plastics GmbH Kebablend® / EC FE 190501 TPE is a TPU with a Shore hardness of A 87. It is characterized by good hydrolysis resistance, very good wear and abrasion resistance as well as good damping and resilience behavior. It also has good electrically conductive properties.

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

BARLOG plastics GmbH Kebaflex® / E 35.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

BARLOG plastics GmbH Kebaflex® / U FE 181105/2 Natural is a TPU with a Shore hardness of A 70. It is characterized by high flexibility, very good wear and abrasion resistance as well as good damping and resilience behavior.

KEBABLEND / EC FE 190501 TPE is a TPE-S with a Shore hardness of D 45. It has good electrical conductivity properties.

TPE-S, Shore A46, black

TPE-S, Shore A60, black, improved compression set at high temperatures

Polyester elastomer, Shore D25, suitable for food contact

BARLOG plastics GmbH Kebaflex® / SG 85.E A.02 is a TPE-S, Shore A86, extrusion. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / S FE 150903 is a development product for the production of flexible, flame-retardant components. Kebaflex® / S FE 150903 has a Shore hardness of 60 A and, from a wall thickness of 1.6 mm, achieves the V0 classification based on the UL 94 test standard. The material is suitable for for the production of seals in electrical and electronic applications.

TPE-S, Shore A65, natural

TPE-S, Shore A75, black

TPE-S, Shore A77, good wear behavior, translucent

BARLOG plastics GmbH Kebaflex® / S 80 A.01 is a TPE-S, Shore A83, translucent. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A60, translucent

BARLOG plastics GmbH Kebaflex® / U A85 ST C01 is a TPU with a Shore hardness of A 85. It is characterized by its excellent flowability and is also suitable for thin-walled components. Kebaflex® / U A85 ST C01 is very resistant to hydrolysis, flexible at low temperatures and resistant to microorganisms,.

TPE-S, Shore A40, black, with improved compression set at high temperatures

BARLOG plastics GmbH Kebaflex® / S FE 170402 is a TPE-S, Shore A90, extrusion. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / S FE 160404 is a TPE-S, Shore D28, also suitable for extrusion, food compliant according to 10/2011 EG. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A45, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

BARLOG plastics GmbH Kebaflex® / E 85.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A75, modified for good adhesion to polycarbonate

TPE-S, Shore A30, natural

BARLOG plastics GmbH Kebaflex® / E 60.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

TPE-S, Shore A45, modified for good adhesion, etc. On PBT, PC and PC / ABS blends.

TPE-S, Shore A35, modified for good adhesion to polyamides such as PA6, PA66, PA12 or partially aromatic PA types such as e. g. GRIVORY GV (manufacturer EMS-GRIVORY)

TPE-S, Shore A50, translucent

TPE-S, Shore A80, filled, suitable for EMC-appropriate shielding of electromagnetic fields

TPE-S, Shore A50, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.