Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Reinforcement Form
- Reinforcement Material
- Composite Materials Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Composites End Use
- Recommendations
Recommendation Resin Specifics Barrday Thermoplastic Matrix Pressing Temperature 275oF (135oC)* Bump Cycle #1 After 2 minutes at target temperature Bump Cycle #2 After 5 minutes at target temperature The bump cycles are required to allow moisture to escape and to prevent blistering of the finished hard panels) Pressure Recommended starting point of 500 psi+ Pressing Time 25 min (at target temperature) Cool-down Below 100oF (38oC) while under pressure Storage Store in a dry place under 70oF
Properties
- Physical Form
Technical Details & Test Data
- BALLISTIC PERFORMANCE
- TEMPERATURE PERFORMANCE
- Correct Layup
- Incorrect Layup
- Release Liner