Products

TU100 is a polyphenylene sulfide (PPS) fiber-reinforced uni-directional tape that processes in the 600-650oF (315-345oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PPS is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties. Quality Certifications - Barrday Composite Solutions is AS9100 and ISO9001 certified.

TU300 is a polyetherketoneketone (PEKK) fiber-reinforced uni-directional tape that processes in the 675-725oF (360-385oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PEKK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

Epoxy resins are a family of thermosets that offer a broad variety of performance characteristics. Epoxies are well known for their strength, toughness and their ability to be formulated to cure under a wide variety of time and temperature conditions. Epoxy prepregs are structural materials that are used in a wide variety of applications in the composites industry. In protective applications they can provide structural support to strengthen and stiffen soft armor structures as well as to reinforce ceramic plates to provide multi-hit resistance to armor piercing rounds.

PSR133 is a high performance phenolic resin available in neat resin and prepreg form. Prepregs manufactured with PSR 133 meet the stringent requirements of MIL-R-9299C, Grade B. PSR133 is the most cost effective phenolic available and offers excellent char yield for carbon/carbon applications and does not exhibit micro-cracking in high modulus composite structures.

TF200 is a polyetheretherketone (PEEK) fabric semi-preg that processes in the 700-750oF (370-400oC) temperature range. The materials are used in a variety of high performance, structural composite applications. PEEK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

EPM104 is a moderate Tg, highly toughened epoxy prepreg system designed for a wide varierty of industrial structural applications. EPM104 is suitable for autoclave, press or bag molding operations. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified.

LC194 is an advanced phenolic prepreg system that is self-adhesive to aramid/phenolic and honeycomb core. LC194 offers very good and consistent adhesion property values (climbing drum peel strength) over a wide range of cure/laminating conditions. LC194 is self-extinguishing, and meets flammability requirements for use in aircraft interiors.

LC196 is an advanced, snap curing phenolic prepreg system that is self-adhesive to aramid/phenolic and aluminum honeycomb core. LC196 offers very good and consistent adhesion property values (climbing drum peel strength) over a wide range of curellaminating conditions. LC196 is self- extinguishing, and meets flammability requirements for use in aircraft interiors.

LC294 is a phenolic prepreg system tailored to specific manufacturing and performance benefits for a variety of aircraft interior applications. LC294 provides extremely low OSU heat release combined with low smoke, self extinguishing, and excellent self adhesive properties and surface finish. LC294 is suitable for both press and bag molding operations. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified

TF100 is a polyphenylene sulfide (PPS) fabric semi-preg that processes in the 600-650oF (315-345oC) temperature range. The materials are used in a variety of high performance, structural composite applications. PPS is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

EPM502 is a 250⁰F (121oC) curing toughened epoxy prepreg system that is designed for structural applications in aircraft interiors and other markets. This system is self-extinguishing and easily meets the requirements for both the 12 second and 60 second Vertical Ignition Tests listed in FAR 25-853. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified

TU1100 is a polyvinylidene fluoride (PVDF) fiber-reinforced uni-directional tape that processes is in the 350-400oF (175-200oC) temperature range. The prepreg is designed for oil & gas composite pipe and down-hole applications. PVDF is a semi-crystalline polymer with a good combination of strength, toughness, chemical and solvent resistance.

TF300 is a polyetherketoneketone (PEKK) fabric semi-preg that processes in the 670-700oF (355-370oC) temperature range. The materials are used in a variety of high performance, structural composite applications. PEKK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

Low fired stretch broken and spun carbon. Improved erosion resistance for solid rocket motors. Rayon replacement

Low fired stretch broken and spun carbon. Improved erosion resistance for solid rocket motors. Rayon replacement

EPH301H is a high Tg, highly toughened, controlled flow epoxy prepreg system that can cure in as low as 5 minutes in-hot, out-hot via compression molding process or even shorter with post cure, and is designed for high volume, structural applications in automotive and other industrial markets. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified.

Toughened, low heat release epoxy prepreg system (Sub 35/35 OSU). Self-adhesive to honeycomb. Excellent surface finish. EPM503-1 is offered as a press grade system. EPM505 is designed for bag molding.

EPM503-1 is a toughened, low heat release epoxy prepreg system designed for a variety of aircraft interior applications. EPM503-1 provides the low OSU heat release typically attributed to phenolic systems combined with the mechanical properties of an epoxy system. EPM503-1 is self-adhesive to honeycomb and has excellent surface finish. EPM503-1 is currently offered as a press grade system. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified.

TU400 is a polyetherimide (PEI) fiber-reinforced uni-directional tape that processes is in the 660-710oF (350-375oC)temperature range. The prepreg is used in a variety of high performance, structural composite applications. PEI is an amorphous polymer that provides high temperature resistance, toughness and superior FST properties.

LC296 is a snap curing phenolic prepreg system tailored for press molding in a variety of aircraft interior applications. LC296 provides extremely low OSU heat release combined with low smoke, self extinguishing, and excellent self adhesive properties and surface finish. LC296 is suitable for crushed core as well as flat honeycomb sandwich panel molding. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified.

EPH302 is a moderate Tg, highly toughened, controlled flow epoxy prepreg system that can cure in as low as 3 minutes via compression molding process and is designed for high volume, structural applications in automotive and other industrial markets. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified

TU200 is a polyetheretherketone (PEEK) fiber-reinforced uni-directional tape that processes in the 700-750oF (370-400oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PEEK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.