Products

Plurafac® S 305 LF is a low foaming surfactant with a cloud point of 19°C. The final surfactant choice will depend on the formulation and cleaning process temperature. It provides benefits such as defoaming and foam control, as well as wetting and low foam properties.

Plurafac® RA 300 is a surfactant composed of fatty alcohol alkoxylates with a cloud point of 37°C. It is a low-foaming product and is listed on the EPA's Safer Chemical Ingredients List. It is suitable for use in a variety of applications, including bottle wash, rinse aid, and cleaning in place.

Plurafac® LF 120 is a low-foaming nonionic surfactant composed of fatty alcohol alkoxylates. It exhibits excellent cleaning properties and synergistic effects when used in combination with Dehypon LS 36, resulting in reduced foam behavior. This versatile surfactant is suitable for various applications, including dishwashing, food and beverage processing, food service and kitchen hygiene, commercial laundry, and institutional cleaning and sanitation.

Lutensol® CS 6250 is a clear, colorless liquid with 100% activity that is a good solubilizer, penetrating agent, and low-foaming agent. It acts as a co-solvent or co-surfactant with a cloud point greater than 100 °C. It is a petroleum-based, non-ionic surfactant, and Lutensol® AO 7 is the main component in this category.

Sokalan® PA 30 is an acrylic acid homopolymer with excellent performance properties. The product has good dispersancy, helping to prevent the redisposition of suspended soils back onto surfaces, and is a dispersing agent that can be used for both organic and inorganic solids.

Dehypon® LS 24 is a low-foaming non-ionic surfactant. It is an EO/PO derivative used for detergents and cleaners in which foaming has to be kept to a minimum. It appears as a yellowish liquid, clear to slightly cloudy at room temperature.

Sokalan® CP 9 is a hydrophobically modified polyacrylate, available as an approximately 25% solids liquid. It has the potential to inhibit incrustation and scale formation as a result of its ability to disperse suspended solids. It boosts detergent effectiveness by overcoming deficiencies seen when phosphates are removed from formulations.

Sokalan® CP 42 is a scale inhibitor for automatic dish wash detergents, particularly effective agianst Ca-phosphate. It is composed of modified polycarboxylate and is appears as clear to turbid liquid of 40% concentration. The product boosts detergency overcoming deficiencies seen when phosphates are removed from formulations.

Pluronic® N3 is a 100% active product suitable for low temperature commercial dishwashing machines. It provides excellent defoaming and wetting, with a low foaming surfactant and a cloud point of 28°C. It has very good synergy with Plurafac SLF 180 when used as a rinse aid in a low temperature dishwashing machine and is listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Plurafac® S 505 LF is a low-foaming surfactant composed of fatty alcohol alkoxylates with a cloud point of 47°C. The final choice of surfactant depends on the formulation and cleaning process temperature. It provides excellent wetting and low foaming, making it suitable for rinse aid applications.

Plurafac® LF-901 is a nonionic surfactant with low foaming properties. It is made up of predominantly unbranched fatty alcohols that are alkoxylated with both higher alkene oxides and ethylene oxide. This 100% active product provides benefits such as low foaming solutions and wetting capabilities.

Lutropur® MSA is a high-purity, readily biodegradable, and less corrosive strong acid with a low vapor pressure and a high dissolving capacity on many scales. Lutropur® MSA has synergy with certain acids and also with Trilon® M (a chelating agent) on many scales. It is an excellent product for removing dye or pigment-type soils. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List.

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Sokalan® HP 66 K is a modified copolymer of vinylpyrrolidone and vinylimidazole and is available in liquid form with a concentration of approximately 41%. It offers significantly better performance compared to PVP, with higher activity and better solubility in detergents than Sokalan® HP 56 K.

Pluronic® 17R4 is a 100% active product that is ideal for use as a foam controlling agent in machine floor cleaning applications. The final choice of surfactant will depend on the specific formulation. This EO/PO-block polymer has approximately 40% EO and a cloud point of 46°C.

Sokalan® CP 7 is a copolymer of methacrylic acid and acrylic acid. Polymeric dispersing agents have the potential to inhibit incrustation and scale formation due to their ability to disperse suspended solids. Furthermore, Sokalan® CP 7 boosts detergent properties, thereby overcoming deficiencies seen when phosphates are removed from formulations.

Sokalan® HP 96 is a clear to rarely slightly cloudy, yellow liquid at room temperature, available as a 70% active liquid. It tends to form sediment when cold and can help reduce the level of anionic surfactants in laundry formulations while providing anti-graying benefits.

Sokalan® CP 5 Granules are available as granules with a concentration of approximately 92%. It has a high charge density and is ideal for powdered detergents. Its mean molar weight (Mw) is 70,000, and its calcium carbonate dispersion capacity (mg/g active polymer) is 280 at 60°C, pH 11. The residue is friable and thus will not promote re-soiling.

Plurafac® SLF 180 is a low-foaming surfactant with a cloud point of 18°C and is listed on EPA’s Safer Chemical Ingredients List. It is suitable for low temperature cleaning (45°C or lower) and has very good synergy with Pluronic N3, especially when used as a rinse aid in low temperature warewash machines. Final surfactant choice will be formulation dependent.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Plurafac® LF-224 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Polyquart® Pro A is a moderately hydrophobic surface modification polymer, sold as a clear liquid of concentration 22%. It has better electrolyte tolerance than Polyquart 149 and a wider usage pH range of 1-14. Recommended concentration at use is 0.2-0.45% as supplied. It is approved for non-food use as an inert with the EPA, and can be used in registered cleaning formulations requiring non-food use only.

Dehydol® 100 Liquid 90% is an alkyl polyethylene glycol ether made from C12–C18 alcohol and contains 9 moles of ethylene oxide. It is 90% active and available as a liquid at room temperature, with a cloud point of 80°C. Due to its wetting and emulsifying power, it's used in all kinds of household and institutional cleaners.

Sokalan® HP 56 Granules are polymeric dispersing agents with the potential to inhibit incrustation and scale formation. They are available as granules with a minimum concentration of 95%. These granules provide significantly better performance compared to PVP and boost detergency, overcoming deficiencies seen when phosphates are removed from formulations.

Sokalan® CP 5 is a polymeric dispersing agent that has the potential to inhibit incrustation and scale formation. This is due to its ability to disperse suspended solids, which boosts detergent efficacy and overcomes deficiencies seen when phosphates are removed from formulations.

Polyquart® PN 60 is a clear to slightly hazy liquid with a concentration of 40%. This multifunctional cationic polyethylenimine is designed for use in the detergent and cleaner industry, especially in strong acidic or strong alkaline power cleaners, due to its hydrophilic surface modification properties.

Dehypound® M is a high-performance, sustainable non-ionic surfactant blend that offers versatility for multiple soils and applications in Home Care, I&I, and car wash cleaners. Its powerful cleaning capabilities without the use of solvents, combined with its low film and streak performance, make it an ideal choice for hard surface cleaners. Furthermore, its foam profile enables a variety of formulation options and dispensing possibilities, while also helping simplify your ingredient portfolio by eliminating the need for solvents and additional hydrotropes in your finished formulation.

Lutensol® A 65 N is a liquid product with a concentration of 100%, or Lutensol® TO 89 in a 90% solution. The hydrophobe is based on saturated iso-C13 alcohol with moderate branching and has a cloud point of 60°C. It offers excellent detergency and wetting power and is a moderate foamer. Additionally, it is highly compatible with other nonionic, cationic, and anionic surfactants.

Lutensol® LA 60 is a low-foaming solubilizer and penetrating agent that can also act as a co-solvent or co-surfactant. It is commonly used for its detergency in various cleaning formulations and is useful for wetting, dispersing, emulsifying, and providing detergency.

Trilon® C Liquid 50% is a clear, amber, aqueous solution of pentasodium diethylenetriaminepentaacetate (Na5DTPA) that is effective in systems where the chelating agent must compete with other complexing materials and be compatible with concentrated electrolytes. It is used to soften water and remove traces of alkaline earth and heavy metals.

APG® 325N is a liquid product composed of alkyl polyglycosides derived from synthetic C9-C11 fatty alcohol and dissolved in water. It is a liquid product of approximately 50% concentration and has high primary cleaning, excellent gloss retention (low to no streak) and excellent plastic compatibility.

Lutensol® XP 70 is a 100% active product suitable for machine and manual floor cleaning as a low-foaming degreasing agent. It is readily biodegradable, has a lower tendency to form gel compared to longer-chain alcohol ethoxylates, and is listed on Safer Choice. The final surfactant choice, however, would be formulation-dependent.

Lutensol® XL 50 is a 100% active product with a comparatively lower level of residual alcohol than regular alcohol ethoxylates with the same degree of ethoxylation. It is suitable for use as a foam control and degreasing agent in machine floor cleaning.