Products

Lutensol® XP 70 is a 100% active product suitable for machine and manual floor cleaning as a low-foaming degreasing agent. It is readily biodegradable, has a lower tendency to form gel compared to longer-chain alcohol ethoxylates, and is listed on Safer Choice. The final surfactant choice, however, would be formulation-dependent.

Glucopon® 625 UP is a long-chain APG surfactant available as an approximately 50% viscous liquid. It functions as a mild degreaser and foaming/stabilizing surfactant, is listed on Safer Choice, and is 100% natural carbon. It is mild to the skin and can synergistically reduce skin irritation caused by anionic surfactants. It has synergy with lactic acid to increase the dish clean plate count and contains no biocide for preservation. Additionally, it is listed on the EPA's Safer Chemical Ingredients List.

Plurafac® LF 900 is a surfactant composed of 5% surfactant in a 25% solution of BDG, which provides excellent foam control and good wetting. It is listed on the EPA’s Safer Chemical Ingredients List, and its benefits include defoaming and foam control, as well as wetting and low foam properties.

Glucopon® 215 UP is a short-chain APG sold as a liquid of 63.5% concentration. This mid-chain APG surfactant has moderate hydrotropic ability and high foam, providing good primary cleaning. It is 100% derived from renewable resources and is used as a mild degreaser and foaming/stabilizing surfactant that won't damage even floor finishes. It has excellent gloss retention and plastic compatibility, and contains no biocide for preservation. It is listed on the EPA’s Safer Chemical Ingredients List and is approved for direct release to the environment.

Pluriol® E 600 LS is a polyethylene glycol of molecular weight 600. It can have the consistancy of a milky white liquid or a semi-solid depending on the ambiant temperature. Pluriol® E 600 LS is heat stable and hygroscopic with a low vapor pressure.

Sokalan® CP 9 is a hydrophobically modified polyacrylate, available as an approximately 25% solids liquid. It has the potential to inhibit incrustation and scale formation as a result of its ability to disperse suspended solids. It boosts detergent effectiveness by overcoming deficiencies seen when phosphates are removed from formulations.

Lutropur® MSA is a high-purity, readily biodegradable, and less corrosive strong acid with a low vapor pressure and a high dissolving capacity on many scales. Lutropur® MSA has synergy with certain acids and also with Trilon® M (a chelating agent) on many scales. It is an excellent product for removing dye or pigment-type soils. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List.

Plurafac® LF-901 is a nonionic surfactant with low foaming properties. It is made up of predominantly unbranched fatty alcohols that are alkoxylated with both higher alkene oxides and ethylene oxide. This 100% active product provides benefits such as low foaming solutions and wetting capabilities.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Plurafac® LF RA-P is an excellent rinse aid surfactant for plastics, providing a superior drying profile that minimizes spotting and filming on plastics in industrial and institutional wash applications. By reducing manual and mechanical drying times, it saves costs for manual labor and energy.

Sokalan® CP 10 is a dispersing ingredient that functions as a performance booster and is available as a fully neutralized version (pH approximately 8.5) in approximately 45% liquid form. This product finds applications in hard surface cleaning, food and beverage processing, food service and kitchen hygiene, commercial laundry, institutional cleaning and sanitation, and vehicle and transportation care.

Trilon® M Liquid T is a readily biodegradable liquid product with an approximately 40% active concentration. It improves cleaning performance with stubborn stains such as natural fats, sebum, blood, milk, ink, and dingy soils. It also shows excellent stain removal performance in laundry detergents and can be used in both alkaline and acidic formulations.

Dehypon® LT 104 is a low-foaming surfactant with marked wetting power. It can be used in low-foaming industrial cleaners, machine-dishwashing agents, and formulations based on sodium hydroxide or phosphoric acid where conventional fatty alcohol polyglycol ethers are not sufficiently stable during storage.

Tinogard® TL is a broad-spectrum UV light stabilizer that protects light-sensitive colorants, fragrances, and actives from photolytic degradation. It reduces the viscosity loss of acrylate-based gels and inhibits light-induced yellowing. Tinogard® TL is non-ionic, oil- and alcohol-soluble, and can be easily incorporated into oil- or aqua-based systems. It usually needs to be pre-mixed with a fragrance, emollient, non-ionic surfactant, or solubilizer.

Pluronic® 31R1 is a 100% active product with a cloud point of 25°C. It is suitable for machine floor cleaning as an excellent foam controlling agent and provides very good defoaming properties. The final surfactant choice depends on the formulation. It is listed on EPA’s Safer Chemical Ingredients List and is suitable for institutional cleaning and sanitation as well as food and beverage processing and kitchen hygiene.

Demelan® VPC is a thickener for acidic systems that is highly effective on mineral acids, has shown excellent primary cleaning on certain soils, and mixes into solution up to three times faster than other competitive thickeners, providing improved processing time. It is also compatible with all types of anionic, cationic, and amphoteric surfactants.

Plurafac® LF 431 offers excellent caustic stability and does not yellow when in direct contact with NaOH beads. The choice of final surfactant depends on the formulation and temperature of the cleaning process. Its essential properties include wetting, low-foaming, or even defoaming.

Sokalan® CP 5 is a polymeric dispersing agent that has the potential to inhibit incrustation and scale formation. This is due to its ability to disperse suspended solids, which boosts detergent efficacy and overcomes deficiencies seen when phosphates are removed from formulations.

Trilon® BX Powder is the tetrasodium salt of ethylenediaminetetraacetic acid (EDTA-Na4) in solid form and of high purity. It plays an active role in removing many types of soil and boosting the detergency of laundry detergent by sequestering heavy metals. Furthermore, it can be used in all types of cleaner and degreaser formulations for I&I applications, with 84% active powder.

Lutensol® XL 70 is a 100% active product with very fast dynamics and excellent detergency on oily soils. It has a lower tendency to form a gel compared to longer-chain alcohol ethoxylates due to its fast-acting nature, which is attributed to its superior wetting profile.

Sokalan® CP 5 Granules are available as granules with a concentration of approximately 92%. It has a high charge density and is ideal for powdered detergents. Its mean molar weight (Mw) is 70,000, and its calcium carbonate dispersion capacity (mg/g active polymer) is 280 at 60°C, pH 11. The residue is friable and thus will not promote re-soiling.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Plurafac® S 505 LF is a low-foaming surfactant composed of fatty alcohol alkoxylates with a cloud point of 47°C. The final choice of surfactant depends on the formulation and cleaning process temperature. It provides excellent wetting and low foaming, making it suitable for rinse aid applications.

Pluronic® N3 is a 100% active product suitable for low temperature commercial dishwashing machines. It provides excellent defoaming and wetting, with a low foaming surfactant and a cloud point of 28°C. It has very good synergy with Plurafac SLF 180 when used as a rinse aid in a low temperature dishwashing machine and is listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Plurafac® LF-224 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Dehydol® 100 Liquid 90% is an alkyl polyethylene glycol ether made from C12–C18 alcohol and contains 9 moles of ethylene oxide. It is 90% active and available as a liquid at room temperature, with a cloud point of 80°C. Due to its wetting and emulsifying power, it's used in all kinds of household and institutional cleaners.

Luvipur® FM 85 is a liquid product with a concentration of 85%. It can be utilized as a neutralizer or acidifier and has a high dissolving power on different metal scales. It is fully stable in non-oxidizing formulations and readily biodegradable. It finds applications in cleaning in place and manual dishwashing.

Sokalan® CP 42 is a scale inhibitor for automatic dish wash detergents, particularly effective agianst Ca-phosphate. It is composed of modified polycarboxylate and is appears as clear to turbid liquid of 40% concentration. The product boosts detergency overcoming deficiencies seen when phosphates are removed from formulations.

Dehyton® PK 45 is an amphoteric surfactant that is suitable for universal application in cosmetic and pharmaceutical surfactant preparations. When combined with anionic surfactants, synergistic effects are achieved, resulting in a dermatological improvement of the consumer product. Its application properties are comparable to those of conventional cocamidopropyl betaine types.

Dehypon® LS 24 is a low-foaming non-ionic surfactant. It is an EO/PO derivative used for detergents and cleaners in which foaming has to be kept to a minimum. It appears as a yellowish liquid, clear to slightly cloudy at room temperature.

Sokalan® PA 15 is a performance booster and dispersing ingredient that can be used in dishwashing applications. It prevents the redisposition of suspended soils back onto surfaces with good dispersancy. The product helps to enhance cleaning efficiency and reduce spotting and streaking.

Trilon® M Granules SG T are granular products with over 76% active concentration and are readily biodegradable. It is listed on Safer Choice and is 30% more efficient than EDTA. It improves cleaning performance with stubborn stains. Flexible application in alkaline and acidic formulations

Plurafac® LF 303 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.