Products

BC 5008-2 is a very low viscosity, modified, unfilled, room temperature curing, general purpose resin system. Also considered an excellent general purpose adhesive for in-shop use and will function as a laminating system for horizontal surfaces.

MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft³ board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.

MB 1200 is an Apricot and/or Pink colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1200 is low density foam of approximately 20lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1200 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

BC 5114 is a gray low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.

BCC Products EB6200 is a "grain-free" elevated temperature epoxy modeling material known for its superior surface finish, dimensional stability and the ability to maintain tolerances even after being subjected to temperature variations. EB6200 has excellent dimensional stability results from the low coefficient of thermal expansion and high glass transition temperature.ApplicationsMaster Models (Aerospace); Automotive Die Models; Vacuum Forming at Elevated Temperatures; Lay-Up Tools for Medium and High Temperature Curing Prepreg

MB2001 is a general purpose light weight urethane board engineered specifically to meet the tooling requirements of a wide range of applications for the automotive/aerospace, prototype, foundry, and architectural industries. MB2001 is an easy to machine, simulated wood-like product (free or grain) that is dimensionally stable and exhibits unsurpassedwoodworking properties. Some of its outstanding performance features are listed below

MB 1100 is an Olive colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1100 is low density foam of approximately 10lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1100 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

BC 5105 is a clear, unfilled, low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.

BC5009 is a very low viscosity, modified, unfilled, room temperature curing, general purpose resin system.BC5009 is a clear-amber epoxy adhesive especially formulated for the bonding of wood and urethane model board. It may be also used as a laminating resin. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, insuring that they are thoroughly mixed yet wasting no time over mixing.

BC 5010 is a high quality, low viscosity room temperature curing laminating resin. A Safety System for the production of a variety if dimensionally stable fiberglass tools. BC 5010 features low odor and rapid "wet-out" with no vertical drain off. An excellent general purpose laminating resin to meet the tooling requirements for automotive, aircraft, and foundry.

BC 5003 is a medium viscosity, unfilled laminating system. It is a room temperature curing resin with a relatively short pot life. BC 5003 is also considered an excellent general purpose adhesive for in-shop use. Recommended for use in gluing up BCC's Tooling Board Series.

MB 1150 is an Avocado colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1150 is low density foam of approximately 15lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1150 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

BCC Products now offers a truly metal-like machineable modeling plank for today's demanding applications. MB 8250 is an aluminum filled product that is dimensionally stable and exhibits unsurpassed machinable properties.