Products

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.

BC8640E is an easy to use polyurethane elastomer that is suitable for many applications. Special product characteristics include: room temperature mixing and curing, excellent hydrolytic stability, produces durable products that are easily produced, does not contain MOCA, MDA or MDI.BC8640E uses include: molds for plaster and concrete molds for epoxy, polyurethane and polyester castings or laminates fabricating parts such as protective shipping pads or skins for creatures

BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly wear-resistant parts and prototypes. BC8160 can be used to develop thermoplastics type prototypes. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC8160 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

BC 7053 is an iron filled epoxy casting system. This system is a high iron content material that provides unsurpassed wear resistance. BC7053 was designed for use in constructing core boxes, holding and trimming fixtures, foundry patterns, etc.

BC5009 is a very low viscosity, modified, unfilled, room temperature curing, general purpose resin system.BC5009 is a clear-amber epoxy adhesive especially formulated for the bonding of wood and urethane model board. It may be also used as a laminating resin. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, insuring that they are thoroughly mixed yet wasting no time over mixing.

MB2001 is a general purpose light weight urethane board engineered specifically to meet the tooling requirements of a wide range of applications for the automotive/aerospace, prototype, foundry, and architectural industries. MB2001 is an easy to machine, simulated wood-like product (free or grain) that is dimensionally stable and exhibits unsurpassedwoodworking properties. Some of its outstanding performance features are listed below

BC 4544 is a polyester resin base compound that is easy to use, sets in minutes, and can be sanded or carved almost immediately. BC 4544 can be carved, sanded, filed, scraped, drilled, tapped or machined to a feather edge. No paint preparation is required and even accepts stain better than wood.