Products

BC 9060 is a blue colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9060 is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

BC 8660E is a multi-purpose elastomer that can perform many functions. Special product characteristics are: excellent use for molds for casting of concrete and plaster, resists moisture absorption, does not contain MOCA, MDA, TDI or MDI, very easy to use, cures at room temperature.

BC 8635E is a multi-purpose elastomer that can perform many functions. Typical product uses and features are: mold fabrication, skin membrane for animated characters, bumpers and many types of urethane rubber parts, excellent as an adhesive for resilient and flexible bonds, excellent weathering properties for outdoor applications, highly water resistant-insensitive to moisture during cure.

BC 8675E is a multi-purpose elastomer that can perform many functions. Typical product features are: easy to use, cures at room temperature, resists moisture absorption, excellent in use for molds for casting of concrete and plaster, does not contain MOCA, MDA, TDI or MDI. Product uses include: mold fabrication, shock absorbent pads and liners, excellent as an adhesive for high strength and resilient bonds, electrical potting and cable sealing applications, various types of urethane rubber parts.

BCC Resins™ BC 8880 is a two-part urethane gel coat which exhibits excellent handling characteristics and very low moisture sensitivity. Its characteristics include a high modulus and a high hardness. It is a brushable room temperature curing urethane, which finds many general purpose applications such as foundry patterns, cure box liners, and abrasion resistant pads and bumpers. It may also be used as a urethane adhesive. Disabled based on Producer's Request.

BC 8690E is a two-component urethane elastomer compound specifically designed for casting applications. This product is safe, easy-to-handle, room temperature mixing and curing system that contains no TDI, MDA or MOCA. BC 8690E is insensitive to moisture during storage and normal handling; hence, this system will make dependably good void-free parts without the foaming problems that some conventional urethane systems exhibit. The low shrinkage, low viscosity, superior toughness, and excellent detail reproduction of BC 8690E makes this system ideal for general purpose castings and quality tooling operations.

BC 9020 is a violet colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature. The cured rubber is high strength and high tear with good elongation. In addition, BC 9020 features low viscosity, low durometer, and resistance to sulfur clays. BC 9020 is a mold making material designed for the manufacture of flexible molds. These rubber molds are recommended for the use in repetitive production of intricate shapes cast from epoxy or urethane resins. These molds are also used in the potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

BC8860 is a low viscosity two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. It is recommended for use for the production casting of highly wear-resistant parts and linings. This product is a safe, easy-to-handle, room temperature mixing and curing system that does notcontain TDI, MDI, or MOCA. BC8860 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

BC 8760 is a two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. It is recommended for use for the production casting of highly wear-resistant parts and linings. This product is safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, MDA, or MOCA. BC 8760 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit. The low viscosity and simple mix ratio assure uniform and easy mixing.

BC8870 is a low viscosity two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. It is recommended for use for the production casting of highly wear-resistant parts and linings. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC8870 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

BC8640E is an easy to use polyurethane elastomer that is suitable for many applications. Special product characteristics include: room temperature mixing and curing, excellent hydrolytic stability, produces durable products that are easily produced, does not contain MOCA, MDA or MDI.BC8640E uses include: molds for plaster and concrete molds for epoxy, polyurethane and polyester castings or laminates fabricating parts such as protective shipping pads or skins for creatures

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.

BC8990 is a two-component urethane elastomer compound specifically designed for general purpose molding and casting of various shapes. This product is a safe, easy-to-handle, room temperature mixing and curing system that contains no TDI, MDA or MOCA. BC8990 may be used to provide abrasion resistant liners, pads and bumpers. The low shrinkage, low viscosity, superior toughness, and excellent detail reproduction of makes this system ideal for general purpose castings and quality tooling operations. It may also be used in potting and encapsulating applications.

BC 8740E is a two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. It is recommended for use for the production casting of highly wear-resistant parts and linings. This product is safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, MDA, or MOCA. BC 8740E is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit. The low viscosity and simple mix ratio assure uniform and easy mixing. Because of this product's exceptional toughness and abrasion resistance, castings made with BC 8740E A/B are particularly suitable for mining and mineral process industries.

BC 9040T is a clear, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9040T is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.