Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Application
Curing Information
After TR-8899 has been applied, and dried, parts are ready to be cured. Use the table below to choose a time and temperature in which to cure. Beacon recommends 320F for 2.5 hours for best results.
Glue Line Temperature Minimum Gel Time Minimum Cure Time Maximum Cure Time
266°F or 130°C 40 min 14 hours none 284°F or 140°C 32 min 7 hours none 302°F or 150°C 20 min 4 hours none 320°F or 160°C 15 min 2 hours none 338°F or 170°C 10 min 1.5 hours none 356°F or 180°C 8 min 1 1 hour none 374°F or 190°C 6 min 45 min none 392°F or 200°C 4 min 30 min 24 hours 428°F or 220°C 2 min 10 min 60 min Drying Information
Prior to curing TR-8899 must be dried. Drying is accomplished at 77F for ~2 to 4 hours or heated a maximum of 200F for a period of 30 minutes. Do not exceed 200F or the adhesive will begin to cure.
- Base
Epoxy
Properties
- Physical Properties
- Typical Properties
- Composition
Value | Units | Test Method / Conditions | |
Lap Shear Strength (Once Cured) | 4500.0 | psi | ASTM D1002 |
Value | Units | Test Method / Conditions | |
Viscosity | 50.0 | cps | — |
Weight Per Gallon | 9.1 | lbs | — |
Value | Units | Test Method / Conditions | |
Solid Content | 36.0 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- REACH and RoSH Compliance
We certify that all adhesive manufactured by Beacon Adhesives Co. Inc. are in compliance with both REACH and RoSH.
Storage & Handling
- Shelf Life
- 3 months