Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Areas
When mixed and applied as detailed in the Belzona Instructions for Use CIFU), the system is ideally suited for application to the following:
- Roofs
- Gutters
- Parapet walls
- Glazing bars
- Joints
- Seams
- Flashings
- Application Information
Working Life - Will vary according to temperature. At 68°F (20°C) the usable life of mixed material is typically 2 hrs.
Coverage Rate - The theoretical coverage rate for a single layer is 21 sq.ft. (2.0 sq.m.) per liter when applied at a dry film thickness of 12.5 mil (317 micron) on smooth surface. Refer to the IFU for a guide to practical coverage rates.
Cure Time - The system is water resistant immediately after application. Refer to the IFU for the time taken for it to develop ultimate adhesive and mechanical properties.Base Component
Appearance Thixotropic liquid
Color Gray Density 1.61 - 1.63 g/cm3
Viscosity 86 - 94 poise at 104°F (40°C)
Solidifier Component
Appearance Clear liquid Color Yellow Density 0.97 - 1.01 g/cm3
Viscosity 7.5-11.5 Cp at 68°F (20°C)
Mixed Components
Mixing Ratio by Weight (Base : Solidifier) 3.6 : 1 Mixing Ratio by Volume (Base : Solidifier) 2.2 : 1 Belzona 9331 (MR7 Reinforcing Sheet)
Material type Spun bonded 100% polypropylene
Finish Untreated Width 17.0 -17.5 cm or 44.0 - 44.5 cm
Weight 38 - 42 g/m2
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Elongation Reinforced | 150.0 | % | ASTM D412 |
Elongation Unreinforced | 400.0 | % | ASTM D412 |
Hardness (24 hours, 68°F[20°C]). | 35.0 | — | ASTM D2240 |
Sag Resistance | 15 (375) | mils (microns) | — |
Tear Strength Reinforced | 180 (3229) | pli (kg/m) | ASTM D412 |
Tear Strength Unreinforced | 140 (2512) | pli (kg/m) | ASTM D412 |
Tensile Strength Reinforced | 800 (5.5) | psi (MPa) | ASTM D412 |
Tensile Strength Unreinforced | 1140 (7.9) | psi (MPa) | ASTM D412 |
Water Vapor Permeability | 17.0 | g/m2/24 hrs | ASTM D1653 |
Technical Details & Test Data
- Chemical Analysis
The mixed Belzona 3121 has been independently analyzed for halogens, heavy metals, and other corrosion-causing impurities, with the following typical results:
Analyte Total Concentration (ppm)
Fluoride 35 Chloride 92 Bromide ND (<12) Sulfur 28425 Nitrite ND (<9) Nitrate ND (<9) Zinc 20.9 Arsenic 9.8 Antimony, Bismuth, Cadmium, Lead, Tin, Silver,
Mercury, Gallium and IndiumND (<3.0) - Weathering Resistance
Approximately two thirds of the original elongation will be maintained after exposure to 1,000 hours of artificial weathering according to ISO 11341.
- Flexibility
Maintains flexibility down to -8°F (22°C) passing ASTM D522 mandrel test at minimum 3.2mm diameter.
Storage & Handling
- Shelf Life
Separate base and solidifier components shall have a shelf life of 5 years from date of manufacture when stored in their original unopened containers between 32°F (0°C) and 86°F (30°C).