Knowde Enhanced TDS
Identification & Functionality
- Cleaning Ingredients Functions
- Type of Cleaner
- Solvent degreaser
- Composition
- Complex blend of distilled petroleum hydrocarbons
- Technologies
Features & Benefits
- Labeling Claims
- HII Features
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
- In-place electric motors, generators, and A/C machinery.
- Plastic and metal production parts.
- Electronic parts, sub-assemblies, and contacts.
- Hydraulic parts and systems.
- Parts washers.
- Engine and motor flushing.
- Lube/fuel oil testing wet systems.
- Glue, grease, gum, tar, oil, sludge removal.
- Fabric dry cleaning.
- Baking ovens and food handling equipment.
- Applications
- Cleaning: Performs better than any other, even at -60ºF.
- Degreasing: Cold solvent degreaser. No makeup required.
- Controlled Evaporation: Saves time, effort, chemical, and money. Little or no residue or contamination to harm the equipment.
- High Di-Electric Strength: Use while A/C power is connected but inactive.
- Odorless: Use in confined spaces / VOC, well below acceptable levels.
- FDA, EP, and DOD Approved: Safe for use in food handling, ship submarine, ground support, manufacturing, and aircraft equipment. Low skin aggressiveness.
Properties
- Odor
- Odorless; very low
- Specifications
| Value | Units | Test Method / Conditions | |
| Aromatic Content | max. 0.25 | % | ASTM D 3257 |
| Boiling Point(Initial Boiling / Dry Points (Bp) / (Dp) ) | 233.9 - 251.7 | ºC | ASTM D 86 |
| Solvency Capability(KB Value) | 27.0 | - | ASTM D 1133 |
| Electric Conductivity(Di-Electric Strength, AC) | 32.0 | KV | - |
| Specific Gravity | 0.794 | ºF | ASTM D 1298 |
| Vapor Pressure( 20ºC ) | max. 0.1 | mmHg | ASTM D 2879 |
| Freezing / Melting Point | max. -60 | ºF | - |
| VOC | 787.0 | g/l | - |
| Vapor Rate(Threshold Limit Value) | 550.0 | ppm | - |
| Doctor Test | Negative | - | ASTM D 235 |
| Total Chlorine Content | max. 10 | ppm | - |
| Total Phenol Content | max. 0.5 | ppm | EPA 420.1 |
| Dichlorobenzene | max. 0.5 | mg/1 | EPA 8260B |
| Benzene | max. 0.5 | mg/1 | EPA 8260B |
| Tetrachloroethyene | max. 0.7 | mg/1 | EPA 8260B |
| Trichloroethylene | max. 0.5 | mg/1 | EPA 8260B |
| Corrosivity(Copper) | max. 1 | b | ASTM D-130 |
| Titanium Stress Corrosion | No cracking | - | ASTM F 945 |
| Acidity | Neutral | - | ASTM D-847 |
| Soil Cleaning Test | 88.0 | % | U.S. Army soil test method 791C, method 5308.7 |
| Sandwich Corrosion | 1 | ASTM F 1110 | |
| Total Immersion Corrosion | max. 0.01 | - | ASTM F 483 |
| Viscosity(25ºC) | 4.95 | cSt | - |
| Biodegradability | Yes | - | USAF study(when processed in an industrial wastewater treatment plant) |
| Carbon Content(High Purity H Carbon Solvents C 11-C 20) | 100 | % | |
| Non-Volatile Residue | 4 | mg/100ml | ASTM D 1353 |
| Flash Point | 210 | ºF |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging
- NSN6850-01-277-0595 / 5-GAL can.
- NSN6850-01-244-3207 / 55-GAL drum.