Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Excellent anti-wear.
- Enhanced water washout properties.
- High temperature stability.
- Features & Benefits
- Minimally Toxic.
- Not Bioaccumlative.
- Readily Biodegradable.
Applications & Uses
- Applications
- Applications
- Designed for heavy-duty use in a variety of industrial, mobile, and marine applications.
- Any industry (hydroelectric powered dams, construction, refuse, mining, dredging, marine, agriculture, oil & gas, plant operations, etc.) utilizing equipment with a need for a heavy duty grease, especially systems where a release into the environment is possible or where a leak or spill could reach a waste stream.
- This product contains proprietary tackifier additives that make it ideal for marine construction, pins, bushings, and sheave applications.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Base Oil Type | Synthetic Ester | — | ISO 220 |
| Appearence | Tacky | — | — |
| Worked Penetration (60 Strokes) | 265 - 295 | — | ASTM D217 |
| Dropping Point | 255.0 | °C | ASTM D225 |
| Base Fluid Viscosity (40°C) | 195.7 | cSt | ASTM D445 |
| 4 Ball Weld | 400.0 | Kg | ASTM D2596 |
| 4 Ball Wear (Scar Dia) | 0.59 | mm | ASTM D2266 |
| Water Washout (79°C) | 4.2 | % Loss | ASTM D1264 |
| Water Sprayoff | 13.6 | % Loss | ASTM D4049 |
| Roll Stability | +8 | Pts Change | ASTM D1831 |
| Water Stability (After Shell Roll) | +31 | Pts Change | ASTM D7342 |
| Copper Corrosion | 1B | — | ASTM D4048 |
| Readily Biodegradable (min. 60%) | Pass | — | — |
| Biodegradability | min. 60 | % | OECD 301B |
| Minimally Toxic | Pass | — | — |
| Algae (EC 50, 72 hr) | min. 26,000 | mg/L | OECD 201 |
| Daphnia (EC 50, 48 hr) | min. 13,000 | mg/L | OECD 202 |
| Fish (LC 50, 96 hr) | min. 40,000 | mg/L | OECD 203 |
| Not Bioaccumulative (Calculated value as per EPA standard) | Pass | — | — |
| Bio-based Content | 86.0 | % | ASTM D6866 |
Regulatory & Compliance
- Certifications & Compliance
- Approvals
- USDA biopreferred program.
- Classified as Environmentally Acceptable Lubricants (EAL’s) as per the EPA’s guidance document that defines standards for Environmentally Acceptable Lubricants (EPA 800-R-11- 002) and as required by EPA's 2013 U.S. Vessel General Permit (VGP).
Packaging & Availability
- Packaging
- Drum – 400 lb.
- Keg – 120 lb.
- Pail – 35 lb.
- Tube – 14 oz.