Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
- Product Families
- Composition
- ACTIVE INGREDIENT
- Ammonium Nonanoate............................................................ 40.00%
- OTHER INGREDIENTS.......................................................... 60.00%
- TOTAL.................................................................................. 100.00%
AXXE Broad Spectrum Herbicide contains 3.3 lbs. of ammonium nonanoate per US gallon.
Features & Benefits
- Labeling Claims
- Product Highlights
Why AXXE Broad Spectrum Herbicide?
AXXE Broad Spectrum Herbicide is a contact nonselective herbicide that provides control and burndown suppression of annual and perennial broadleaf weeds, grasses, and spore producing plants such as mosses and liverworts. AXXE Broad Spectrum Herbicide is non-volatile, water soluble, does not migrate through the soil, and is not translocated in plants.
-
LABELED FOR FIELD AND GREENHOUSE APPLICATIONS
-
NO TOXIC RESIDUALS (BREAKS DOWN WITHIN A FEW DAYS)
-
4-HOUR REI
-
NON-SELECTIVE WEED CONTROL
-
RESULTS VISIBLE WITHIN A FEW HOURS
-
OMRI LISTED
*OMRI LISTED FOR FARMSTEAD MAINTENANCE (DITCHES, BORDERS AND ROADS)
-
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Herbicide Target Species
- Use Methods
VEGETATIVE BURNDOWN
- Broadcast spray for weed control for no-till planting or seedbed preparation to control weeds prior to seeding or transplanting. Spot sprays may be used in crops, ornamentals, pastures and turf.
PREEMERGENCE SPRAY
- Broadcast or strip applications before seeds germinate and emerge, and before perennial plants, tubers, bulbs or seed pieces sprout and emerge.
INDUSTRIAL AND BUILDING USES
- Apply to weeds in walkways, driveways, parking areas and around buildings or structures. Broadcast or spot sprays may be applied to open field areas and rights-of-way.
DIRECTED AND SHIELDED SPRAYS
- Spray nozzle type or configuration for directed spray or a shield placed around the nozzle to prevent spray contact on the foliage or green stems or back. Use directed/shielded spray applications to the area between plastic mulch strips and staked crops for weed control.
DORMANT OR POST HARVEST SPRAY
- Apply after crops are harvested to kill broadleaf weeds and grasses and residual green growth of the crop plants. Apply to dormant crops such as alfalfa or turf.
SUCKER CONTROL, PRUNING, AND TRIMMING
- Direct spray to kill small tender basal suckers in crops such as brambles and fruit trees.
DESICCATION AND HARVEST AID
- Apply only when crop is ready to harvest and green crop leaves or broadleaf weeds and grasses interfere with harvest. Spray as a broadcast application over the crop and weeds for rapid desiccation of green plant growth to facilitate harvest. Apply as a harvest aid for cotton, potatoes, and other root, tuber and bulb vegetables.
SUCKER CONTROL, PRUNING, AND TRIMMING
- Direct spray to kill small tender basal suckers in crops such as brambles and fruit trees.
- Directions for use
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the State/Tribal agency responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything th at has been treated such as plants, soil, or water is:
- Coveralls worn over short-sleeve shirt and short pants
- Socks and chemical resistant footwear
- Chemical resistant gloves
- Protective eyewear
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses.
Keep unprotected persons out of treated areas until sprays have dried.
- Mode of Action
What is AXXE Broad Spectrum Herbicide's mode of action?
AXXE Broad Spectrum Herbicide is a soap product that penetrates the cell walls of plants. This will disrupt the cellular organization of physiological functions that are compartmentalized by membranes within the cell walls. Plant growth ceases when cellular contents are mixed, which causes brown necrotic plant tissue.
Properties
- Formulation Type
- Physical Form
Safety & Health
- Precautionary Statements
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
Warning: Causes substantial, but temporary eye irritation. Do not get in eyes or on clothing. Wear goggles. Harmful if inhaled. Avoid breathing spray mist. Causes moderate skin irritation. Avoid contact with skin or on clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.
- Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
- Coveralls worn over short-sleeve shirt and short pants
- Socks and chemical resistant footwear
- Chemical resistant gloves
- Protective eyewear
- When mixing and loading wear a chemical resistant apron
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. Do not reuse them. Follow the manufacturer’s instructions for cleaning/ maintaining PPE. If no such instructions for washables, use detergents and hot water. Keep and wash PPE separately from other laundry
- User Safety Recommendations
Users should:
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove PPE immediately after handling this product. Wash outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing
- Environmental Hazards
For terrestrial uses only: This pesticide is toxic to fish and aquatic invertebrates. Use care when applying in areas adjacent to any body of water. Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwater or rinsate. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas.
Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans, or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance contact your State Water Board or Regional Office of the EPA.
Storage & Handling
- Storage and Disposal
Do not contaminate water, food, or feed by storage or disposal
PESTICIDE STORAGE: Store in original container in a cool, dry well-vented area, away from direct sunlight. Do not allow product to become overheated in storage. Do not store in a manner where cross-contamination with other pesticides or fertilizers could occur.
PESTICIDE DISPOSAL: Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law. If these wastes cannot be disposed of by use according to label directions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste Representative at the nearest EPA Regional Office for guidance.
CONTAINER HANDLING For non-refillable containers equal to or less than 5 gallons: Nonrefillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. Do not burn, unless allowed by state and local ordinances.
For non-refillable containers greater than 5 gallons: Nonrefillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution for 30 seconds. Stand the container on its end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. Do not burn, unless allowed by state and local ordinances.
For refillable containers: Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or a mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times.