Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Features
- AgriPlast granules can be used with any injection molding machine and processed into molded components such as spoons, consoles, machine cases, protective caps, etc. The granules can also be dyed any color.
- Ideal ease of flow for injection molding.
- High cycle times when manufacturing complex molded parts
- AgriPlast is lighter than comparable fibreJreinforced composite plastics.
- Fire protection without antimony and halogen.
- Recyclable and residueJfree disposal when incinerated.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Uses
AgriPlast NFPP 3070 40000HM granules can be used with any injection molding machine and processed into molded components such as spoons, consoles, machine cases, protective caps, etc. The granules can also be dyed any color.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 542 | MPa | DIN EN ISO 527 |
| Yield Stress | 12,2 | MPa | DIN EN ISO 527 |
| Yield Strain | 4,93 | % | DIN EN ISO 527 |
| Tensile Strength | 12,2 | MPa | DIN EN ISO 527 |
| Strain at Tensile Strength | 4,94 | % | DIN EN ISO 527 |
| Flexural Modulus | 515 | MPa | DIN EN ISO 178 |
| Bending Strength | 16,1 | MPa | DIN EN ISO 178 |
| Bending Strain at Bending Strength | 5,1 | % | DIN EN ISO 178 |
| Charpy Impact Strength Unnotched | 27,6 | kJ/m2 | DIN EN ISO 179 |
| Charpy Impact Strength Notched | 11,8 | kJ/m2 | DIN EN ISO 179 |
| Vicat Softening Point | 108 | °C | DIN EN ISO 306 Vicat B/50 |
| Density | 1014 | g/cm3 | DIN EN ISO 1183 |
Technical Details & Test Data
- Processing Notes for AgriPlast NFPP 3070 40000HM
Sufficiently dry at 70 – 80 °C, heating zones of 200 °C decreasing to 170 °C, possible shortJterm peak melting temperature of 210 °C, molding temperature of 40 – 50 °C, avoid frictional and shearing heat, make sure the tool is well ventilated.