Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Application
Types of Applications
- TPO
- Hypalon
- EPDM
- Modified Bitumen
- Built-up
- Urethane Foam Roofs
- Metal
Surface Preparation
The surface must be free of any dirt, moisture, oils, algae or other contaminates that may interfere with good adhesion. Carefully remove any loose material from surface with a wire brush or scraper. Grease and oil should also be removed with environmentally safe solvents or an appropriate detergent such as Imper-Sol Cleaner/Degreaser. In most cases a high pressure water blast will be sufficient to prepare the surface.
Application Temperatures
To obtain the best results, ambient temperatures of the air and the substrate should range between 50°- 100°F. For optimum application, the product should be at a minimum of 70°F. Lower temperatures can be used for brush application.
Application Methods
Imper-Sol EB EP Roof Coating 51 can be applied by brush, spray or roller. See BITEC application bulletins for additional information.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Coverage Rate | 60 - 100 | sf/gal | - |
| Viscosity (78˚F) | 4000.0 | cP | - |
| Drying Time | 2 - 4 | hours | - |
| Elongation | 400.0 | % | ASTM D412 |
| Solids (By Weight) | 49 - 51 | % | - |
| Tensile Strength | 1500.0 | psi | ASTM D412 |
| Weight | 8.6 | lb/gal | - |
| Flash Point | 101.0 | ˚F | - |
| Tip Size | 0.025 | ” | - |
| Fluid Pressure | 3000.0 | psi | - |
| Fluid Hose Size | 3/8 - 1/2 | ” | - |
Storage & Handling
- Handling & Storage
Imper-Sol EB EP Roof Coating 51 vehicle is a blend of solvents considered combustible by the standards of the D.O.T. and O.S.H.A. Keep away from heat, open flame, or sparks. Use in a well ventilated area.
Notice: It should be used and stored away from flames, in a well-ventilated atmosphere. Avoid prolonged breathing of vapors and prevent contact with eyes. Read all label information, SDS, and precautions before using. The specifications, properties and performance of materials described herein are based on information believed to be reliable. Unless otherwise expressly provided in written contract, the products discussed are sold without conditions or warranties, expressed or implied. Product specifications are subject to change without notice.