Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
PMA-186 is composed of high-quality asphalt and highly compatible SEBS (styrene-ethylene-butadiene-styrene) and SIS (styrene-isoprene-styrene) polymers imparting excellent adhesive and waterproofing properties to the overall roof membrane system. PMA-186 adhesive contains a unique blend of special fibers resulting in superior sag resistance and excellent weathering characteristics. PMA-186 is a cold process adhesive with superior sag resistance and excellent weathering conditions.
Additional Product Advantages
- The combination of SEBS and SIS polmers allows the adhesive to perform better at low temperatures and when exposed to the sun’s UV light.
- Can be installed on slopes up to 3:12.
- Since the adhesive is cold process, there is no need for torches or kettles on the job; helps ensure a more organized set up and fewer odors.
- Asbestos free.
Applications & Uses
- Markets
- Application Area
- Compatible Substrates & Surfaces
- Application
PMA-186 is ideal for roofing applications involving cold process membrane application. PMA-186 can be applied by spray , brush or notched squeegee. Apply at a rate of 2.0—2.5 gal/100ft². All safety and good roofing practices should be followed while applying this product. PMA-186 should be installed by a professional; roofing contractor having previous experience in the application methods described. Cold-process roofs should have a minimum slope of 1/4” per ft. to prevent standing water and should not be installed at temperatures below 50˚F or when rain is expected within 48 hours.
Note - Do not use this product on coal tar pitch roof. Dispose of unused portions and empty containers in accordance to local regulations.
- Coverage
2-2.5 gal/sq. (11.4 l)
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (25˚C) | 8.6 | lbs./gal. | ASTM D 1475 |
Viscosity (Brookfield RVT, #6 Spindle, 2.5 rpm) | 160,000 - 200,000 | cPs | — |
Non-Volatile | min. 70 | % | ASTM D-4586 |
Flash Point | min. 100 | °F | ASTM D-93 |
Water Resistance (Under Good Drainage Conditions) | Excellent | — | — |
Regulatory & Compliance
- Compliance
Product meets and/or exceeds ASTM D 4586, Type II, Class I
Packaging & Availability
- Packaging
- 5 gal. pail (18.9 l)