Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Cure Method
- Uses
- RoHS/REACH SVHC Compliant
- Low viscosity and easily poured
- Perfect for skin simulationTranslucent in color
- High elongation
- Appliation Details
INHIBITION:
New molds made with tin catalyzed silicones often have a tendency to inhibit the cure of various urethane materials that arecast against the silicone. Post-curing a new mold at 150F (66°C) for 24 hours will eliminate the cure inhibition problem in most cases. It is also recommended that the mold surface be washed thoroughly with soap and warm water then dried before use.
MIXING:
TC-5005 A/B isprocessed by adding curing agent "B" at a ratio of 10 parts by weight to 100 parts by weight of "A". Mix for 2 to 3 minutes in a clean container, then transfer material to another clean container and mix for another 2 to 3 minutes.The TC-5005 “C” component can be added as much as 50% to the total weight of TC-5005 A/B. This will increase the elongation and lower the amount of force needed to elongate the product. With the maximum amount of part “C” added a slight tack might be present on the surface of the part. By painting this surface with silicone paints or applying talc powder to the surface, this tack can be eliminated.
Properties
- Physical Form
- Appearance
- Translucent
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Hardness | 5 - 15 | Shore A | ASTM D 2240-04e1 |
| Density | 1.09 | g/cc | ASTM D 792-00 |
| Cubic | 25.7 | Inches per Pound | — |
| Tensile Strength | 474 | psi | ASTM D412-98a(2002)e1 |
| Elongation | 550 | % | ASTM D412-98a(2002)e1 |
| Tear Strength | 47 | pli | ASTM D624-00e1 Die B |
| Shrinkage Linear | Nil | in/in | ASTM D2566 (1” depth) |
| Value | Units | Test Method / Conditions | |
| Mix Ratio by weight (Part A) | 100 | — | — |
| Mix Ratio by volume (Part A) | 100 | — | — |
| Specific Gravity (77°F (25°C), Part A) | 1.09 | — | — |
| Color (Part A) | Colorless | — | — |
| Viscosity (77°F (25°C), Part A) | 28000 | — | Brookfield |
| Mixed Viscosity (77°F (25°C)) | 15250 | cps | Brookfield |
| Work Time (100g mass, 77°F (25°C)) | 40 - 60 minutes | — | — |
| Demold Time (77°F (25°C)) | 16 - 24 hours | — | — |
| Mix Ratio by weight (Part B) | 10 | — | — |
| Mix Ratio by volume (Part B) | 11 | — | — |
| Specific Gravity (77°F (25°C), Part B) | 0.99 | — | — |
| Color (Part B) | Colorless | — | — |
| Viscosity (77°F (25°C), Part B) | 55 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safty Precaution
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction.Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.
Storage & Handling
- Storage
Store ambient temperatures, 65-80°F (18-27°C). Unopened containers will have a shelf life of6 months from date ofshipment when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.