Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Appliation Details
INHIBITION:
Certain materials will cause inhibition or neutralization ofthe curing agent. These materials are sulfur containing and organometallic salt containing compounds such as organic rubbers and many condensation cured RTV silicone rubbers. Inhibition may easily be determined by brushing a small quantity of TC-5060 over a localized area of the surface to be reproduced. If the TC-5060 is gummy or uncured after the curing time, then you know the mold surface is acting as an inhibitor. Molds made from wood, plaster, metal or plastic should not cause inhibition if theyare clean. To insure against possible problems, it is advisable to spray a barrier film (BJB product RF-5215) over any questionable surfaces. This is the best way of treating clays and surfaces that cause inhibition.
Properties
- Appearance
- Pale Green
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Hardness | 55 - 65 | Shore A | ASTM D 2240-04e1 |
| Density | 1.34 | g/cc | ASTM D 792-00 |
| Cubic | 20.8 | Inches per Pound | - |
| Tensile Strength | 754 | psi | ASTM D 412-98a(2002)e1 |
| Elongation | 225 | % | ASTM D 412-98a(2002)e1 |
| Tear Strength | 85 | pli | ASTM D 624-00e1 Die B |
| Coefficient of Thermal Expansion | 14.91 x 10⁻⁵ | in/in/°F | ASTM E 831 |
| Shrinkage Linear | Nil | in/in | ASTM D2566 (1” depth) |
| Value | Units | Test Method / Conditions | |
| Mix Ratio by weight (Part A) | 100 | - | - |
| Mix Ratio by volume (Part A) | 100 | - | - |
| Specific Gravity (77°F (25°C), Part A) | 1.37 | - | - |
| Color (Part A) | Off White | - | - |
| Viscosity (77°F (25°C), Part A) | 131000 | - | Brookfield |
| Mixed Viscosity (77°F (25°C)) | 91000 | cps | Brookfield |
| Work Time (100g mass, 77°F (25°C)) | 35 - 45 minutes | - | - |
| Gel Time | 60 minutes | - | - |
| Demold Time (77°F (25°C)) | 6 - 8 hours | - | - |
| Mix Ratio by weight (Part B) | 10 | - | - |
| Mix Ratio by volume (Part B) | 14 | - | - |
| Specific Gravity (77°F (25°C), Part B) | 0.99 | - | - |
| Color (Part B) | Green | - | - |
| Viscosity (77°F (25°C), Part B) | 1200 | - | - |
Safety & Health
- Safty Precaution
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeatedor prolonged contact on the skin may cause an allergic reaction.Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage
Store in a cool dry place.Unopened containers will have a shelf life of 12months from date of shipment when properly stored at room temperatures. Purge opened containers with dry nitrogen before re-sealing.