Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
- Appliation Details
CURE SCHEDULE/HEAT CURING:
Most of the physical properties can be achieved in 5-7 days at 77ºF (25ºC). You may use your own post-cure schedule but the physical properties may vary from BJB’s cure schedule of 1-3 hours at 77ºF (25ºC) followed by 16hours at 160 ºF (71). Do not exceed curing temperatures of 200ºF (93ºC).
If you are using heat to accelerate the demold time, allow the part to cool down to ambient temperature before demolding.
Properties
- Physical Form
- Appearance
- Clear
- Physical Properties
- Typical Properties
- Note
Reported physical properties are based on test specimens cured at an elevated temperature, 160ºF (71°C.)
| Value | Units | Test Method / Conditions | |
| Hardness | 40 - 50 | Shore A | ASTM D2240-04e1 |
| Density | 1.06 | g/cc | ASTM D792-00 |
| Cubic | 26.3 | Inches per Pound | — |
| Tensile Strength | 390 | psi | ASTM D412-98a(2002)e1 |
| Elongation | 300 | % | ASTM D412-98a(2002)e1 |
| Tear Strength | 43 | pli | ASTM D624-00e1 |
| Shrinkage Linear | 0.001 | in/in | ASTM D2566 |
| Dielectric Constant (1 MHz) | 4.13 | — | ASTM D150-87 |
| Dissipation Factor (1 MHz) | 0.095 | — | ASTM D150-87 |
| Value | Units | Test Method / Conditions | |
| Mix Ratio by weight (Part A) | 50 | — | — |
| Mix Ratio by volume (Part A) | 48 | — | — |
| Specific Gravity (77°F (25°C), Part A) | 1.08 | — | — |
| Color (Part A) | Colorless | — | — |
| Viscosity (77°F (25°C), Part A) | 2115 | — | Brookfield |
| Mixed Viscosity (77°F (25°C)) | 910 | cps | Brookfield |
| Work Time (100g mass, 77°F (25°C)) | 20 minutes | — | — |
| Gel Time | 30 minutes | — | — |
| Demold Time (77°F (25°C)) | 8 - 12 hours | — | — |
| Mix Ratio by weight (Part B) | 100 | — | — |
| Mix Ratio by volume (Part B) | 100 | — | — |
| Specific Gravity (77°F (25°C), Part B) | 1.02 | — | — |
| Color (Part B) | Colorless | — | — |
| Viscosity (77°F (25°C), Part B) | 375 | — | — |
Safety & Health
- Safty Precaution
Avoid contact with skin using protective glovesand protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product. Use in well-ventilated areas. Avoid breathing vapors. If exposures cannot be kept at a minimum, a respirator may be necessary in addition to ventilation. The use of a positive pressure air supplied respirator is mandatory when airborne isocyanate concentrations are “not known” or exceeds OSHA’S TWA of 0.005 ppm. Air purifying, organic cartridge type respirators are not generally recommended to use when handling this material without implementation of an end of life service program. Observe OSHA regulations for respirator use (29 CFR 1910.134). Employers are responsible for selecting the correct respirator for each situation.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage
Store at ambient temperatures, 65-80ºF (18-27ºC). Unopened containers will have a shelf life of 6 months from date of shipment when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.