Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Applications & Uses
- Markets
- Application Area
- Compatible Substrates & Surfaces
- Why Primer Is Used
Why Primer Is Used
In most cases a successful solvent cement joint can be made without using a primer/cleaner. But, if you want to increase probability of making a successful joint, using a primer/cleaner is the thing to do. All Purpose Primer/Cleaner accomplishes two things. First, it will clean the pipe and fittings of any dirt, oil, grease and other foreign matter. If the plastic is dirty before making a connection it will be more difficult for the cement to bond the pipe and fitting together. Second, All Purpose Primer/Cleaner will soften the plastic. This allows the cement the opportunity of skipping a step (softening the plastic) and to go immediately to the process of fusing the pipe and fitting together. Note - softening the plastic in cold weather is especially important because it will noticeably speed up the process of making a solvent cement joint. Using All Purpose Primer/Cleaner is always recommended to make a good connection. And remember, in most locations using a primer/cleaner is mandatory according to local codes.
Why Purple?
Using a "clear" primer/cleaner makes it impossible for any inspector to determine whether a primer/cleaner has been used. Because of this the market place has called for a primer/cleaner that has a purple color. In this way an inspector can see the purple color on the pipe and fittings and can know for sure that a primer/cleaner has been used.
What To Do If All Purpose Primer/Cleaner Is Spilled
If All Purpose Primer/Cleaner is spilled use All Purpose Primer/Cleaner (Clear) to dilute the purple color. Depending on the type of surface and the quantity spilled will determine if this solution works.
- Directions
Directions
- All Purpose Primer/Cleaner is recommended for PVC and CPVC pipe and fittings.
- Square cut pipe and remove all dirt and burrs.
- Check dry fit of pipe and fitting. Pipe should easily go into fitting 1/4" to 3/4" of the way.
- Apply liberal amount of All Purpose Primer/Cleaner to all surfaces which will be cemented.
- After cleaning and priming wait 15 seconds to allow surfaces to soften. While surface is still wet apply the cement.
- Follow the directions provided with the solvent cement to make proper joints.
Technical Details & Test Data
- Technical Details
UPC Number and Carton Information
STOCK NO. SIZE UPC NUMBER CARTON CUBIC FEET
8000 1/4 pt 0 54647 08000 0 0.222 8005 1/2 pt. 054647 08005 5 0.385 8010 pt. 054647 08010 9 0.376 8015 qt. 0 54647 08015 4 0.711 8020 gal. 0 54647 08020 8 1 8025 55 gal. 0 54647 08025 3 10.72
Safety & Health
- Safety & Health
Caution
Avoid contact with eyes, mucous membranes, and prolonged skin contact. Use only in a well ventilated area. Avoid prolonged breathing of vapor. Do not use near heat, sparks or flame.
First Aid
- Eyes - flush with plenty of water for 15 minutes. Get medical attention. Skin- flush thoroughly with water. If irritation persists, get medical attention. Internal - if swallowed, give 1 or 2 glasses of water. Do not induce vomiting and call physician immediately.
- Keep out of reach of children.