Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Applications & Uses
Uses
After proper mixing, Black Swan Stik-It Epoxy Putty can be used for 1001 household and industrial purposes including repair and replacement of wall tile, floor tile, cove moldings; electrical use in place of tape, ceramic or plastic connectors, knobs or wire nuts; auto repairs including permanent bonding of trim, small dent repairs, fuel tanks, oil pan, small part repairs, filling rust holes, tread locking; seals leaks in gutters and downspouts; mend toys, appliances, lawn mowers, sports equipment, etc; repairs air conditioning coils, ducts; patching chipped concrete floors, bricks, blocks, attaching fixtures, machine tags, signs, anchoring bolts, screws, rods, machines, housings, etc.
Application
In order to achieve optimum adhesion, surfaces should be cleaned free of grease or dirt. Scuffing or sanding the surface prior to cleaning helps insure good bond. Degreasers such as 1, 1, 1 - trichloroethane, methylene chloride, etc., are effective and non-flammable.
Mixing
- Twist or cut off required amount.
- To mix, knead with fingers to a uniform color. If mixing is difficult, warm Black Swan Stik-It Epoxy Putty to room temperature or slightly above.
- Apply to the surface to be repaired (within 2 minutes of mixing). The mixed epoxy does not exhibit high bond strength at this point, but appears to be merely lying on the surface.
- Force epoxy putty into any cracks or holes to be filled and strike off excess material, preferably with a tool wetted with clean water.
- For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening.
- Remove excess material before hardening begins.
- After 5-10 minutes the epoxy will harden and start to form a tenacious bond.
- After 60 minutes, Black Swan Stik-It Epoxy Putty can be drilled, sawed, filed, tapped, machined or painted.
Technical Details & Test Data
- Technical Details
APPLICATION PROPERTIES RESULTS Working Life: 4-7 Minutes Shelf Stability: 12 Months Minimum @ 75°F
Shored Hardness (Shore D)(Full Cure, 24 Hours) 80 Lap Shear Tensile Strength On Steel (1"x 1" x 1/16" lbs.): 900 Temperature Limitations: 250° F Continuous, 300° F (Intermittent)
Chemical Resistance: Resistant To Hydrocarbons, Ketones,Alcohol, Esters
Electrical Resistance: 30,000 Megohms
Dielectric Strength: 300 Volts/Mil Shrinkage: Less Than 1% Non-volatile I content 100% Compressive strength: 12,000 PSI UPC Number And Carton Information
Stock No. Size UPC Number Carton Cubic Feet
1112 2 0z. 0 54647 01112 7 0.056 1115 4 0z. 054647 01115 8 0.134
Safety & Health
- Safety & Health
Health Precautions
When mixing by hand, Black Swan Stik-It Epoxy Putty does not cause skin irritation to individuals with normal skin sensitivity. Individuals with extra-sensitive skin should maintain caution and wash hands thoroughly after mixing the compound, or wear thin plastic gloves. Stik-It Epoxy Putty has been proven to be non-toxic and non-skin irritating to experimental animals when tested in accordance with accepted test methods of Federal Hazardous Substances Labeling Act.
Warning
- Contains epoxy resins and amine which may cause irritation to sensitive skin. Wash hands with soap and water after use.
- Eye irritant. In case of eye contact, flush with water. Contact physician.
- May be harmful if swallowed.
- Keep out of reach of children