Products

Dispelair® RF 44 foam control product has been designed to combat foam production and air entrainment resulting in an improvement in the production process. This is suitable for all production systems.

Dispelair® Cyltac 133 is a base coat product to protect the yankee cylinder, release oils to control adhesion and modifiers to alter the properties of the base coat.

Dispelair® BS 25 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

Dispelair® DP 762 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 219 is a highly effective foam control agent for aqueous adhesives and for very foamy systems.

Dispelair® SOFTIS TS 20 is designed to combat foam generated in the jet dyeing processes at high temperatures and pressures. This wetting agent is designed to ensure even dyeing of the textile fabric.

Dispelair® BS 925 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

Dispelair® CF 837 is a foam control agent for decorative emulsion paints. It is highly efficient in elastomeric systems.

Dispelair® DP 336 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 536 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Cylcon 111 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.