Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
Since Blue Gold Industrial Cleaner does not react with the oils it removes, the product can be recycled again and again through filtration systems with little or no loss in efficiency. It disperses oils so there is no sludge build-up. When the agitation system is turned off, oils rise to the surface and can be easily removed, while particulate matter settles to the bottom leaving the solution clean and virtually new.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Applications
Blue Gold Industrial Cleaner can be used in a variety of application methods and is safe for both ferrous and non-ferrous metals, does not harm painted surfaces, natural rubber, electric wiring insulation, leather, carpet, silicon rubber, neoprene or polypropylene.
Heated Dip Tanks
Blue Gold Industrial Cleaner should be used at a 1 part BGIC to 20 parts water concentration and heated to 140°F. Blue Gold Industrial Cleaner can replace chlorinated hydrocarbons in vapor degreaser tanks with minor modifications. Vapor tanks can be easily and economically converted to a submersion system with the addition of a source of agitation. It is recommended that 60% of the tank volume per minute be moved in order to provide the best agitation. Air agitation is not recommended.
Ultra-sonics
Blue Gold Industrial Cleaner in a 5% concentration is a perfect cleaner to use in ultrasonic tanks. The tank should be heated to 140°F. Parts washed in Blue Gold Industrial Cleaner and thoroughly dried are protected from surface rusting for approximately 7 to 15 days. These parts can then be painted, welded or bonded with no further treatment.
High Pressure Sprayers & Steam Cleaners
Blue Gold Industrial Cleaner is ideal for high pressure and steam cleaning applications. It keeps every part of the system clean and free of corrosion, thus reducing maintenance and down time. In application tests, it has been shown that the higher the pressure the lighter the concentration needed for effective cleaning. The following is a suggestion on various concentrations based on the pressure (psi).
Pressure Water Temp. Dilution 150 - 300 PSI
Cold 1 - 50 100°F - 130°F 1 - 100 500 - 800 PSI
Cold 1 - 100 100°F - 130°F 1 - 250 1000 PSI
Cold 1 - 200 100°F - 130°F 1 - 400 Hand Wiping
Blue Gold Industrial Cleaner is safe enough to use in hand wiping applications. It is suggested however, if prolonged use is necessary that you use gloves as the Blue Gold Industrial Cleaner will take the oils out of your hands. (Most of the compressed gas applications and oxygen related cleaning applications are accomplished with hand wiping).
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Approval
Blue Gold Industrial Cleaner is now approved by the NSF International.
Product Designation Registration Number Category Code Blue Gold Industrial Cleaner 158738 A1, A4, A8 A1 - Compounds for use as a general cleaner.
A4 - Floor and wall cleaners for use in all departments
A8 - Degreasers or carbon removers for food cooking or smoking equipment, utensils, or other associated surfaces.
Technical Details & Test Data
- Quality
Blue Gold Industrial Cleaneras an excellent quality control program to insure each batch made meets the highest quality standards. Blue Gold Industrial Cleaner has been tested to many AMS, ARP, ASTM and company specifications. It outperforms most caustics, chemicals and solvents, even at reduced operating temperatures, as proven by the Federal Standard Cleaning Test.
Safety & Health
- Safety
Blue Gold Industrial Cleaner is not corrosive, flammable or toxic (either through vapor inhalation, skin contact or ingestion). All ingredients in Blue Gold Industrial Cleaner are on the TSCA inventory list and it has no B.O.D. (biological oxygen demand) and very low V.O.C. (volatile organic compound is 0.5% in a 0.5% solution).