Blygold

Blygold® PoluAl WB is a water based product with corrosion inhibiting ingredients and high content of aluminum pigmentation for diffusion control and heat conductivity. Improved wetting on hydrophobic surfaces makes the product very surface tolerant (compared to other water-based coatings). High corrosion and UV resistance.

Blygold® PoluAl XT is an aluminum pigmented polyurethane coating especially developed for the protection of air-cooled heat exchangers. PoluAl XT stands apart from the rest. It has an excellent chemical and UV resistance. It offers flexibility, excellent adhesion with negligible effect on the heat transfer. Plus it can be applied in a very thin layer, to prevent pressure drop. PoluAl XT combines all these properties with extraordinary corrosion protection.

Blygold® PoluAL MC prevents early micro channel HX failure, Heat conductive protective layer and Highly flexible for coil bending.

Blygold® Casing guard is for the most severe exposure conditions. HVAC equipment at oil platforms, coastal environments or wastewater plants are examples where the system has a long track record. All reasonable accessible surfaces are thoroughly pretreated , primed with Refamac 3509 and finished with Refamac 3800. The primer creates excellent adhesion to OEM coatings and bare metals, special metallic pigments provide the first corrosion protective barrier. The finishing coating “3800” is designed to create coverage even on vulnerable sharp edges. The thin layer technology creates a smooth and extremely protective finish with limited layer thickness.

Blygold® Clearcoat is a transparent coating system that enhances the existing OEM coating properties. The coating adheres directly to several coating types without special primer or pre-treatment. The finished surface has ahigh gloss and has a extremely long resistance against UV exposure. The application of the Blygold Clearcoat will also bring back faded colors of HVAC equipment. The thin and smooth film has repellent properties that limits the adhesion of pollution. The coating is applied after thorough cleaning of all visible surfaces of the HVAC equipment. Because of the transparency of the coating, the unit will maintain the original OEM color.