Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Solvent
Denatured Alchohol
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Allows treated surface to breathe
- Retards efflorescence
- Stops freeze/thaw damage
- Repels water-born chemicals & atmospheric dirt
- No yellowings or peeling
- Single coat coverage
Applications & Uses
- Markets
- Application Method
- Use
Elastiment 9-19-55 can be used to protect parking decks, garages, ramps, bridges, airport runways, stadiums, monuments, statues, con- crete pavers, buildings, precast and prestressed concrete products, brick and stone veneers.
- Application
Elastiment® 9-19-55 is always used as a single coat treatment. Surfaces to be treated must be clean and free of loose debris, dirt, mildew, oils and grease. The surface may be damp but not wet. A dry surface is preferable since it will allow maximum penetration of Elastiment® 9-19-55into the substrate. Apply Elastiment® 9-19-55 by brush, roller or low pressure spray techniques. Low pressure spray is recommended where practical for rapid and thorough application of Elastiment® 9-19-55. When spraying, apply enough material to generate a slight rundown of product. For a horizontal surface, start at one edge and work backwards toward the opposite edge, applying enough Elastiment® 9-19-55 to saturate the surface. The surfaces must be permitted to dry after treatment for proper cure to take place.
- Maintenance
If treated surface becomes dirty, pressure wash with water or a soapy water solution. Rinse with a clean water spray.
- Limitation
- Any previously treated, stained, or painted surface must have a test application to insure compatibility. A test application is also recommended if exact coverage figures are required.
- Do not apply to a frosted or saturated surface.
- Do not spray in strong wind conditions. Overspray will not affect most glass, metal or painted surfaces if removed shortly after application. Remove any overspray from glass, metal or vinyl surfaces immediately after application by wiping with a damp cloth, followed by wiping with glass cleaner. Clean tools immediately after application with water.
Properties
- Color
- Physical Form
- Appearance
- Clear Liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active Content by Weight | 40.0 | % | - |
| Flash Point | 55.0 | °F | - |
| Solvent | Denatured Alchohol | - | - |
| VOC | max. 590 | g/l | - |
Technical Details & Test Data
- Test Data
Minimum Requirement E-9-19-55 Solution
NCHRP 244 Report Series | Test
% Reduction in Water Absorption 75 83.8 % Water Vapor Transmission 100 111.4 % Reduction in Chloride Intrusion 75 82.7 Minimum Requirement E-9-19-55 Solution
Series IV Test Northern Climate 90 97.6 Southern Climate 90 97.6 E-9-19-55 Solution
Freeze-thaw Durability ASTM C-666 Relative Dynamic Modules of Elasticity 95.3 Scaling Resistance ASTM C-672 50 Cycles 2 OPS 1351.08.01 50 Cycles 1 Minimum Requirement E-9-19-55 Solution
Alberta DOT Evaluation Waterproofing
Before Sandblasting % 82.6 85.3 After Sandblasting % 75 85.1
Safety & Health
- Safety
Do not ingest. Avoid contact with skin where possible. Wash exposed skin areas promptly with water. Avoid inhalation of vapor, it may cause skin sensitization or other allergic responses. If product gets in eyes, rinse immediately and repeat. Get prompt medical attention.
Storage & Handling
- Handling
Under normal warehouse conditions material can be stored for 12 months in airtight containers below 100°F. Elastiment® 9-19-55 is flammable and should be kept away from open flames, sparks, etc. When working in an enclosed area, breathing apparatus should be used. Keep container tightly closed when not in use.