Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Mixing Instructions
Elastiment® 957 is a 1:1 ratio material (PART A: to PART B). Add all of the Part A to Part B and mix thoroughly. After mixing, allow mixed material to stand for 15 minutes (minimum). This time, known as induction time is critical and must be observed.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point (Mixed) | 55.0 | °F | - |
| Mixing Ratio by Volume (Part A) | 1.0 | - | - |
| Mixing Ratio by Volume(Part B) | 1.0 | - | - |
| Pot Life (75°F, 50%RH) | 16.0 | Hours | - |
| Solids Content | 25.0 | % | - |
| Tack FreeTime (75°F, 50%RH) | 1.0 | Hours | - |
| Theoretical Coverage | 250.0 | Ft’/gal. | - |
| Viscosity (Mixed) | 15.0 | Cps | - |
Safety & Health
- Safety
Avoid contact with skin where possible. Wash exposed skin areas promptly with water. Avoid inhalation of vapor, it may cause skin sensitization or other allergic responses. If mortar gets in eyes, rinse immediately and repeat. Get prompt medical attention.