company tower banner
Boiardi Products Company Logo

Elastiment® 962

1 of 5 products in this brand
Elastiment® 962 is a two component epoxy-urethane primer which is modified with adhesion promoters. E-962 is used as an adhesion promoting primer when applying one or two part coatings onto most metallic or other “difficult to adhere to surfaces”. Surface must be clean, dry and free of all oxidation or corrosion. E-962 has excellent water and chemical resistance.

Product Type: 2K (2 component) Coating, Primer

Compatible Substrates & Surfaces: Concrete, Metal

Features: Chemical Resistant, Corrosion Resistant, Good Adhesion, Oxidation Resistant, Water Resistant

Chemical Family: Urethanes

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Applications & Uses

Compatible Substrates & Surfaces
Mixing Instructions

Elastiment® 962 is packaged in pre-measured kits containing the proper amount of Part A and Part B. Kits should not be proportioned. Pour Part B into Part A and mix until thoroughly blended. Allow the mixed compound to stand for 15 minutes (minimum). This time, known as induction time is critical and must be observed.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Flash Point (Mixed)26.0°F-
Mixing Ratio by Weight (Part A)100.0--
Mixing Ratio by Weight (Part B)75.0--
Pot Life (75°F, 50%RH)8.0Hours-
Solids Content25.0%-
Tack FreeTime (75°F, 50%RH)45.0Min-
Theoretical Coverage250.0Ft’/gal.-

Safety & Health

Safety

Avoid contact with skin where possible. Wash exposed skin areas promptly with water. Avoid inhalation of vapor, it may cause skin sensitization or other allergic responses. If mortar gets in eyes, rinse immediately and repeat. Get prompt medical attention.