Products

Bomar™ BR-641D is a Polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass,and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene,and Polypropylene.

BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene.

Bomar™ BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200oC for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and Polystyrene. This material has low skin sensitivity for dental and cosmetic applications.