Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- Improves Adhesion
- Increases Weatherability
- Enhances Hardness
- Provides Abrasion Resistance
- Non-Yellowing
- Gloss Finish
- Low Water Absorption
- Provides Alkaline Resistance
- High Temperature Resistance
- Low Skin Sensitivity
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Cure Method
- Coating Type
- Applications
- Moisture resistant coatings and adhesives
- Coatings and inks for plastic
- Coatings and inks for glass
Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Pt-Co Color (APHA) | 29 | — | — |
| Pt-Co Color | 29 | APHA | — |
| Refractive Index (25°C) | 1.48 | — | — |
| Density (25°C) | 1.09 | g/cm3 | — |
| Viscosity (25 °C) | 90,000 | cP | — |
Regulatory & Compliance
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS Aluminum XX XX XX Cold Rolled Steel
XX XXX XXX X Glass XXX XXX XXX XX HDPE PET PMMA Polycarbonate XXX XXX XXX XXX Polypropylene PVC Stainless Steel XXX XXX XXX X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 5,700 900 — 1,000 500 2,300 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
1,400 1,300 - 1,200 1,200 1,000 Elongation, 6** 180 70 - 13 5 160 Elastic Modulus, ksi*
0.8 8 - 20 30 1 Durometer Hardness
52D 70D - 70D 72D 31D Water Absorption, 96 (24 hrs)
0.4 0.3 - 0.6 0.5 25 MEK Double Rubs (#)
22 19 - 35 >200 62 Tg(DMA)=32°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction with Reactive Diluents
