Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Characteristics and Advantages
- Low color
- Medium viscosity
- Excellent adhesion to glass fibers
- Very good mechanical properties
- Outstanding filler binding power
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Uses
- Casting decorative parts and accessories
- Manufacturing embedded parts
- Highly transparent castings
- Hand lay-up
- Urban furniture fabrication
- Aqua park equipment fabrication
- Playing Ground Equipment fabrication
- Solid surface
- Artificial stone
Properties
- Appearance
- clear
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Water absorption | Max 0.3 | wt% | ISO 62 |
| Acid number | Max 26 | mg KOH/g | ASTM D1639 |
| Color | Max 1 | Gardner | ASTM D1544 |
| Curing time | 44389 | min | ASTM D2471 |
| Density (at 23°C) | 1.1293 | g/cm³ | ASTM D1475 |
| Flash point (open cup) | 22 | °C | ASTM D92 |
| Flexural modulus | 2384 | MPa | ISO 178 |
| Flexural strength | Min 115 | MPa | ISO 178 |
| Gel Time | 25-6 | min | ASTM D2471 |
| Hardness (Barcol) | min. 40 | — | ASTM D2583 |
| Heat distortion temperature (HDT) | Min 60 | °C | ASTM D648 |
| Linear shrinkage (ΔL/L) | Max 1.3 | % | ASTM D2566 |
| Peak exothermic temperature | Max 190 | °C | ASTM D2471 |
| Solid content | 62±2 | wt% | ASTM D1259 |
| Tensile elongation | 8.86 | % | ISO 527-2 |
| Tensile modulus | 639 | MPa | ISO 527-2 |
| Tensile strength | Min 60 | MPa | ISO 527-2 |
| Viscosity (at 25°C) | 380-480 | mPa.s (cP) | ISO 2555 |
Safety & Health
- Product safety and Environmental protection
The usual protective measures employed during the handling of Unsaturated Polyester Resins should be observed. Further product safety information can be obtained from our Material Safety Data Sheet which is available on request.
Packaging & Availability
- Packaging
225 kg (net) in steel drums
Storage & Handling
- Storage
Store in a cool place below 25 °C and away from moisture and direct sunlight. Under above mentioned storage conditions, the shelf life of the resin will be at least 6 months ex-works.