Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- Based on metal salts of neodecanoic acid (neodecanoates)
- Catalyzes redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides and to a change in valency from Co2+ to Co3+
- Initiates rapid surface drying
Applications & Uses
- Applications
- Coating Type
- Applications
- Oxidative systems, including:
- Architectural paints
- Industrial coatings
- Stains
- Varnishes
- Oxidative systems, including:
- Dosage
- In conventional alkyd formulations, the cobalt amount is in the range of 0.03 to 0.08 % metal, calculated on the solid binder. In paints and varnishes Borchers® Deca Cobalt mostly is combined with Borchers® Deca Zirconium and Octa-Soligen® Calcium 10, basic. In printing inks, a combination of Borchers® Deca Cobalt and Borchers® Deca Manganese is recommended. The cobalt amount is in the range of 0.03 to 0.05 % metal, calculated on the solid binder. Irrespective of these guidelines, the addition should always be determined in preliminary trials. In the case of Borchers® Deca Cobalt 7 aqua, suitable secondary driers are Borchers® Deca Zinc 10 aqua and Octa-Soligen® Zirconium 10 Aqua.
Properties
- Physical Form
- Appearance
- Clear, middle-viscous violet liquid
- Physical Properties
Value | Units | Test Method / Conditions | |
Density (at 20°C) | 0.960 – 1.000 | g/cm³ | DIN 51757 |
Metal Content (Co) | 6.80 - 7.20 | % | ISO 4619 |
Solvent | Water dispersible oil | — | — |
Viscosity (at 20°C) | 200 - 980 | mPa.s | ISO 3219 (A) |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety
- Please refer to our safety data sheet for information relating to product safety.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage
- Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each removal of the product.