Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Features
- Specifically designed for dispersing and stabilizing transparent iron oxide pigments
- Excellent with opaque iron oxides
- Small particle size dispersions producing high transparency
- Low viscosity grinds allowing for up to 40 % pigment loading with transparent iron oxide pigments and over 60 % with opaque iron oxides
- Long-term dispersion stability with no settling is possible when combined with Borchi® Gel PN or NA
- Suitable with titanium dioxide and other inorganic pigments and fillers
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Dosage
The exact dosage should be experimentally determined through a ladder study. Borchi® Gen 1750 should be added to the mill base before adding the pigment. Active pigment loading:
- Transparent iron oxide: 50 – 70 %
- Titanium dioxide: 4 – 8 %
- Inorganic pigments: 5 – 15 %
- Organic pigments: 25 – 70 %
Properties
- Appearance
- Yellow liquid
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.03 - 1.07 | g/cm³ | — |
| Non-volatile Content | 38 - 42 | % | — |
| pH | 3.5 - 5.5 | — | — |
| Solvent(s) | Water | — | — |
| Viscosity | max. 1000 | mPa.s | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Safety
- Please refer to our safety data sheet for information relating to product safety.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage
- Protect from the effects of weather and store at temperatures between 5 and 40 °C. Once opened, the container should be resealed immediately after each use. The material will become cloudy over time during storage at temperatures below 10 °C – this doesn’t affect the performance, but the product should be homogenized before use. The cloudiness can be reversed by heating to room temperature or by heating short term to 40 °C (until clear) without affecting the performance of the product.