Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- Ensures uniform, optimum through-drying of the paint film
- Improves hardness
- Coatings dried with Octa-Soligen® 146 show optimal drying characteristics even after the coating is stored for an extended period of time
Applications & Uses
- Compatible Polymers & Resins
- Applications
- Pale-colored formulations
- Conventional alkyd systems, including:
- Alkyd urethane coatings
- High-solids systems
- Dosage
- Octa-Soligen® 146 can be added to the coating at every formulation step. Previous dilution in solvent or resin is not necessary. We recommend the addition during the let-down before the addition of anti-skinning agents. The addition of Octa-Soligen® 146 depends on the type and amount of binder used. Generally speaking, the addition is between 3 and 5 %, calculated on the solid binder content. The exact amount required must always be determined by preliminary trials.
Properties
- Physical Form
- Appearance
- Clear, middle-viscous violet liquid
- Physical Properties
- Media
- Solvent-based
Value | Units | Test Method / Conditions | |
Density (at 20°C) | 0.900 - 0.940 | g/cm³ | DIN 51757 |
Metal Content (Ca) | 3.90 - 4.10 | % | DN 55901 |
Metal Content (Co) | 1.10 - 1.30 | % | DN 55901 |
Metal Content (Li) | 0.55 - 0.65 | % | DN 55901 |
Metal Content (Total) | 5.55 - 6.05 | % | DN 55901 |
Non-volatile Content (2g, 3h, 105°C) | 47 - 57 | % | ISO 3251 |
Solvent (Containing max. 1% Aromatics) | White-spirit | - | - |
Viscosity (at 20°C) | max. 120 | mPa·s | ISO 3219 (A) |
Regulatory & Compliance
Safety & Health
- Safety
- Please refer to our safety data sheet for information relating to product safety.
Packaging & Availability
- Country Availability
- Regional Availability
- Availability
- Asia, EMEA
Storage & Handling
- Storage
- Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each removal of the product