Knowde Enhanced TDS
Identification & Functionality
- Cleaning Ingredients Functions
- Technologies
- Ingredients
100 g deconex® 50 FF include:
- 12g Ethandial
- 0.5 g Pentandial
- 7.5 g Didecyldimethylammonium chloride
Excipients:
Surfactants, perfume, dye and corrosion inhibitor.
Features & Benefits
- Labeling Claims
- HII Features
- Properties
- Widely used for surface and instrument disinfection
- Combined cleaning and disinfecting properties for surface and instrument application
- Low dosage
- Pleasant smell
- Good effectiveness even under blood and protein load
- Tested service life of the solution in the suspension test under low load up to 7 days
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
Dosage recommendation
Instrument disinfection: 0.5 - 1.5%, according to desired effect. Surface infection: 0.25 - 1.5%, according to desired effect.
Application recommendation
Instrument end disinfection - Preparing the disinfectant solution by diluting to the desired concentration with water - deconex® 50 FF can be used for all water hardnesses. Before disassembly, disassemble instruments into individual parts as far as possible. The surface must be completely wetted, avoiding air bubbles in cavities. At the end of the exposure time, rinse the instruments well, final rinsing step with demineralized water. A visibly contaminated use solution must be replaced immediately. In a product change on deconex® 50 FF it is recommended that the instruments of an intermediate cleaning eg, with deconex® 36 INTENSIVE-x to teach.
Surface infection - Before the first use of deconex® 50 FF is a cleaning eg with deconex® 36 INTENSIVE-x recommended. If an amine containing product has been used beforehand, an intermediate cleaning is in any case required. It is recommended to have an intermediate cleaning at regular intervals, eg with deconex® 36 INTENSIVE-x perform. The distances are according to the frequency of use of deconex® 50 FF. In general, no products containing soap and/or anionic surfactants should be used for intermediate cleaning, as these have the effectiveness of deconex® 50 FF can influence.
Properties
- Appearance
- Clear, Green
- Typical Properties
| Value | Units | Test Method / Conditions | |
| pH value (1% Solution in city water) | approx. 7 | — | — |
| Density (Concentrate) | 1.06 | g/mL | — |
Technical Details & Test Data
- Effectiveness
Spectrum of action
Methodology
Concentration (%)
Effect time
Bactericidal and levurocidal effect (instrument disinfection)
DGHM Guidelines for the Test of Chemical Disinfection Procedures (1981 and 1984) - 1 30 min Instrument Disinfection, with Load 0.5 60 min Bactericidal and levurocidal action (surface infection)
DGHM Guidelines for the Examination of Chemical Disinfection Procedures (1981, 1984, 1991) - 0.5 30 min Surface Disinfection 0.25 60 min Tuberculosis effect (Mycobacterium phlei) DGHM Guidelines (1981 and 1984) 1.5 60 min Virus activity: Limited virus: effective against enveloped viruses incl. HBV, HCV, HIV, Influenza
DVV guidelines, with burden 1 5 min BVDV and Vakzinia 0.25 30 min MNV (Norovirus) EN 14476, low load 1 30 min Rotavirus * DVV guidelines, no load 0.25 30 min * Experimental load not possible
- Material Compatibility
Suitable for - Stainless steel, aluminum, chrome-plated brass, the common plastics including ABS, polyamide, PE, plexiglass, polycarbonate, PET, POM, PSU and PVC, seals (acrylic dispersions), linoleum and PVC floor coverings In addition, deconex® 50 FF by Karl Storz and Pentax for the preparation of their endoscopes is released and listed accordingly. For non-named materials, suitable compatibility tests are performed.
Safety & Health
- Safety Instructions
Biocidal Products Regulation (EU) no. 528/2012, Article 72: Use disinfectant carefully. Always read label and product information (including safety data sheet) before use. There you will find tips on occupational safety, storage and proper disposal.
Packaging & Availability
- Packaging
Bindings, closures and labels are made of recyclable polyethylene. Dosing aids and disinfectant tubs are available as accessories. Please be advised.
Bond sizes:
Bound species
Content
Article number
Bottle 1 L 504400.00-F10W
Canister 5 L 504400.00-K05W
Canister 10 L 504400.00-K10W
Canister 25 L 504400.00-K25W
IBC 1000 L 920 L 504400.00-IBC1
Storage & Handling
- Storage
Store product at temperatures between 5 - 25°C.