Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
Excellent flow behavior
Very good impact performance for low temperature applications
Good antistatic properties
Reduced cycle time and increased output
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
Appliances
Pails up to 5L
Thin wall containers
Ice cream containersWhite goods
Food packaging
Houseware- Processing Methods
BH975MO is easy to process with standard injection molding machines.
Following parameters should be used as guidelines:
Melt temperature: 200 - 250°C
Holding pressure: 200 - 500bar As required to avoid sink marks
Mold temperature: 15 - 40°C
Injection speed: As high as possible
Shrinkage 1 - 2%, depending on wall thickness and molding parameters
Properties
- Physical Properties
Value | Units | Test Method / Conditions | |
Density | 900-910 | kg/m3 | ISO 1183 |
Hardness, Rockwell | 92 | Scale R | ISO 2039-2 |
Melt Flow Rate (230°C/2.16Kg) | 38 | g/10min | ISO 1133 |
Tensile Modulus (1Mm/Min) | 1500 | MPa | ISO 527-2 |
Tensile Strain At Yield (50Mm/Min) | 4 | % | ISO 527-2 |
Tensile Stress At Yield (50Mm/Min) | 25 | MPa | ISO 527-2 |
Flexural Modulus | 1550 | MPa | ISO 178 |
Tensile Strain At Yield | 4 | % | ASTM D638 |
Tensile Stress At Yield | 25 | MPa | ASTM D638 |
Flexural Modulus(By 1% Secant) | 1500 | MPa | ASTM D790A |
Charpy Impact Strength, Notched (23°C) | 8 | kJ/m² | ISO 179/1eA |
Charpy Impact Strength, Notched (-20°C) | 4,5 | kJ/m² | ISO 179/1eA |
Izod Impact Strength, Notched (23°C) | 80 | J/m | ASTM D256 |
Izod Impact Strength, Notched (-20°C) | 55 | J/m | ASTM D256 |
Heat Deflection Temperature(0,45Mpa)** | 105 | °C | ISO 75-2 |
Vicat Softening Temperature(Method A) | 150 | °C | ISO 306 |
Regulatory & Compliance
- Recycling
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
- Standards
Borouge is certified to various ISO standards
Safety & Health
- Safety
The product is not classified as a hazardous preparation.
Storage & Handling
- Storage
BH975MO should be stored in dry conditions at temperatures below 50°C and protected from UV-light. Improper storage can initiate degradation, which results in odor generation and color changes and can have negative effects on the physical properties of this product.