Knowde Enhanced TDS
Identification & Functionality
- Cleaning Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Product Features
- Wide pH range
- Outstanding reliability and versatility
- Suitable for products with high salinity
- Available in easy-to-use emulsion form
- Good high temperature performance
- BRB Snapsil RE 10 is a highly effective, water soluble silicone based antifoam emulsion which has been developed specifically for technical applications and can be used in a broad pH range
- Recommended diluent : soft or deionised water
- Product Benefits
- Excellent knockdown as well as defoaming performance.
- Highly effective enabling attainment of foam control with minimal addition of non-nutrient additives
Applications & Uses
- Markets
- Usage Guidelines
The antifoam disperses easily in both hot and cold aqueous systems, requiring only mild agitation to disperse it completely in the foaming system. For maximum efficiency and economy, however, we recommend the antifoam be pre-diluted with water before use, in the ratio of one volume of BRB Snapsil RE 10 to four volumes of cool soft or deionised water, the water being added slowly to the antifoam with continual low shear agitation. The diluted antifoam should be used with twelve hours of dilution for best results. The quantity of BRB Snapsil RE 10 required to control foaming can only be found by experiment. In general, between 0.01 and 0.5 g/l of as supplied antifoam is all that is required. Apart from storing the emulsion under reasonably cool conditions, no special storage precautions need to be taken.
Properties
- Physical Form
- Diluent
- Soft/Deionised Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Active Content | 15 | % | — |
pH Value | 6 - 9 | — | — |