Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Advantages
- Good adhesion to steel I-beams without the use of primers
- 2 hour rating with ”thick coat on” untreated, unprimed steel
- One pass thick build with no drip or sag on vertical surface
- Easy to mix and apply with low cost equipment (application by single component spray equipment or trowel)
- Does not need primers or top coat
- Highly Impact resistant
- Water and Chemical resistant
- Interior and Exterior Use
- Strong adhesion; pull values in excess of 2300 psi
- Cost effective
- Castable
- Very low smoke
- Non Toxic per BSS7329 protocol
Applications & Uses
- Markets
- Applications
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Solids | 100 | % | — |
Full Cure (25°C) | 72 | h | — |
Mix Ratio (A:B) | 100 : 7 | — | — |
Mix Viscosity (25°C) | 88000 | cps | — |
Tack Free Set Time (25°C) | 4 | h | — |
Working Life (25°C) | 2 | h | — |
Regulatory & Compliance
- Quality Standards