Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Product End Uses
- Applications
Temperature Range
-60°C to 230°C and up to 250°C intermittent.
Typical Applications
Automotive, Domestic & Commercial Catering, Construction, Electronics, Energy, Food & Beverage, Heating & Ventilation (HVAC), Industrial, Lighting and Marine.
Properties
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Hardness | 80 ± 5 | Shore A ±5 | ASTM D2240, DIN ISO 7619-1 |
| Tensile Strength | 7.0 | MPa | ISO 37 type 1, ASTM D412 die C, DIN 53504 type S1 |
| Elongation to Failure | 215.0 | % | ISO 37 type 1, ASTM D412 die C, DIN 53504 type S1 |
| Tear Strength | 17.0 | N/mm | ASTM D624 die B |
| Compression Set (24hrs, 150°C) | 18.0 | % | BS903 pt A6 type B, DIN/ISO 815 type B |
| Compression Set (22hrs, 300°F) | 16.0 | % | ASTM D395 method B type 2 |
| Value | Units | Test Method / Conditions | |
| Brittle Point | -80.0 | °C | ASTM D746 |
| Limiting Oxygen index | 24.0 | % | BS 2782 Part 1 |
| Thermal Conductivity | 0.24 | W.m-1.K-1 | VDE 0304 |
| Radiation Resistance (Typical) | min. 10⁵ | Grays | — |
| Dielectric Strength | 23.0 | kV.mm-1 | VDE 0303 |
| Dielectric Constant | 2.9 | — | VDE 0303 |
| Dissipation Factors | 3x10⁻⁴ | — | VDE 0303 |
| Volume Resistivity | 3x10¹⁵ | Ω.cm | VDE 0303 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Specifications
- Our color range has been tested to and is in compliance with the American Food and Drugs Administration (FDA) 21 CFR 177-2600, BFR XV Empfehlung and color bleed test; according to BFR Empfehlung Part B 11 & Directive EC 1935/2004.
- Translucent, Blue, White, Red, and Black have been approved by WRAS (Water Regulations Advisory Service) for use with potable water at temperatures up to 85°C (185°F). This listing number is 1310541.
- These products meet the flammability requirements of FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a) (1) (iv) and (a) (1) (v) horizontal flammability tests and Automotive Standard PART 571FMVSS302.;
- Most grades of solid silicone are FDA compliant for use with food and drink contact. FDA approved rubber will meet both national and international legislation requirements for the non-contamination of food.
Technical Details & Test Data
- Environmental Resistance
Silicone rubber products have an excellent resistance to ozone, oxidation, ultraviolet light, corona discharge, cosmic radiation, ionizing radiation and weathering in general.
Packaging & Availability
- Packaging Type
- Available In
- Supplied in continuous roll lengths
- Widths of 1200mm (standard), 1500mm and 1800mm
- Pressure sensitive adhesive backing
- Punched and Water Jet gaskets
- Full range of standard colors
- Capability to color match;