ARC® 855(E)

Identification & Functionality

Product Type

Solventless & High Solids Coating

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Protective Coatings

Composition

Matrix:

• A modified epoxy resin reacted with a modified cycloaliphatic amine curing agent.

Reinforcement (Proprietary):

• A proprietary blend of ceramic particles providing smooth, wear resistant surface.

Features & Benefits

Labeling Claims

VOC-free

Ready-to-Use Product Features

Abrasion Resistant,

Chemical Resistant,

Corrosion Resistant,

Excellent Flow Properties,

Excellent Substrate Adhesion,

Good Adhesion,

Good Erosion Resistance,

High Gloss,

High Performance,

Low Shrinkage

Designed to

• Upgrade new and old equipment exposed to abrasion, corrosion or chemical attack.
• Replace traditional coatings, special alloys, engineered plastics, ceramics, etc.
• Easily apply by roller or brush.

Features & Benefits

• Abrasion-resistant surface
  • Extends equipment life
  • Reduces spare parts
  • Reduces downtime
• High gloss, low drag surface
  • Improves material flow
  • Enhances efficiency
• High adhesive strength
  • Prevents under-film corrosion
• 100% solids; no VOCs; no free isocyanates
  • Enhances safe use
  • No shrinkage on cure
  • Resists permeation
• Low viscosity, thin film, brush or roller applied coating
  • Easy to apply
  • Saves repair time

Applications & Uses

Markets

Building & Construction,

Paints & Coatings

Applications

Building & Construction — Building Materials

Pipes & Plumbing

Paints & Coatings — Industrial Coatings

Industrial Coatings

Application Area

Tanks,

Vacuum Pumps,

Valves

Application Method

Brush,

Roller,

Spray

Compatible Substrates & Surfaces

Ceramic,

Plastics

Application Areas

• Pump Casings
• Impellers and blades
• Heat Exchangers
• Bins and Silos
• Hoppers
• Waterboxes
• Transport Screws
• Tanks and Vessels
• Valves

Coverage

• ARC 855(E) requires a minimum of two coats.
• Nominal, based on a 750 µm (30 mil) thickness.
• 0.75 liter kit covers 0.98 m2 (10.60 ft2).
• 1.5 liter kit covers 2.00 m2 (21.53 ft2).
• 5 liter kit covers 6.67 m2 (71.76 ft2).
• 16 liter kit covers 21.33 m2 (229.63 ft2).

Properties

Technical Data

	Value	Units	Test Method / Conditions
Cured Density	112.0	lb/cu.ft.	-
Compressive Strength	13000.0	psi	ASTM D 695
Flexural Strength	8200.0	psi	ASTM D 790
Pull-Off Adhesion	5900.0	psi	ASTM D 4541
Tensile Strength	4200.0	psi	ASTM D 638
Linear Coefficient of Thermal Expansion	3.1 X 10E-5	in/in/°F	ASTM C 531
Composite Hardness	88.0	Shore D	ASTMD 2240 (Durometer)
Vertical Sag Resistance (70°F, 0.38mm)	No Sag	-	-
Maximum Temperature (Wet Service)	149.0	°F	-
Maximum Temperature (Dry Service)	248.0	°F	-

Packaging & Availability

Packaging

• 0.75 liter kit
• 1.5 liter kit
• 5 liter kit
• 16 liter kit
• Each kit includes mixing and application instructions. 0.75 liter, 1.5 liter & 5 liter kits include tools.
• Components are pre-measured & pre-weighed.

Storage & Handling

Shelf Life

• 2 years.
• Unopened containers.
• Stored between 10°C (50°F) and 32°C (90°F) in dry, covered facility.