Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Recommended Use
- For fresh water tanks.
- May be used in other tanks and dry spaces.
- Surface Preparation
- Best results are obtained on gritblasted steel to ISO-Sa 2.5.
- For more specific instructions please consult our special CLEANKEEP 5000 surface preparation and application advice.
- Thinner
Epoxy thinner A for cleaning only.
- Application Data
- Airless spray, brush, roller.
- In case of brush or roller application more layers may be required to achieve the specified film thickness.
- Add the hardener to the base whilst mixing.
- Stir well before use.
- For Airless Spray
- Tip No.: Graco 619, 721
- Thinning: No thinning required
- Preferable Preceding Coating
- CERABOND 2000
- EPICON ZINC HB-2 SH
- CLEANKEEP 5000 HOLDING PRIMER
Properties
- Physical Properties
- Component A
- Component B
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point Mix | min. 100 | °C | — |
| Solids by Volume (Mix) | 100.0 | % | — |
| Value | Units | Test Method / Conditions | |
| Mixture by Weight | 88.0 | — | — |
| Mixture by Volume | 81.0 | — | — |
| Value | Units | Test Method / Conditions | |
| Mixture by Weight | 12.0 | — | — |
| Mixture by Volume | 19.0 | — | — |
| Value | Units | Test Method / Conditions | |
| Minimum Temperature | 10.0 | °C | — |
| Surface Temperature Dew Point | min. 3 | °C | — |
| Maximum Humidity | 85.0 | % R.H. | — |
| Paint Output Pressure | 23.5 - 33.4 | MPa | — |
| Film Thickness Wet | min. 300 | µm | — |
| Film Thickness Dry | min. 300 | µm | — |
| Spreading Rate (Theoretical) | 3.3 | m²/l | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Overcoatability
Temperature Drying Time at DFT 300 µ Overcoating Time at DFT 300 µ Pot life 10°C
Surface dry:45 hours Min.: 4 days 1.5 hours
Hard dry 4 days Max.: 14 days 20°C
Surface dry:18 hours Min.: 32 hours 1 hour
Hard dry 32 hours Max.: 14 days 30°C
Surface dry:11 hours Min.: 24 hours 45 min
Hard dry 24 hours Max.: 14 days
Safety & Health
- Minimum Safety Precautions
- Observe the precautionary notices displayed on the container.
- Provide adequate ventilation.
- Avoid skin contact and inhalation of spray mist.
- If the product comes into contact with the skin, wash thoroughly with luke warm water and soap or suitable cleaner.
- If the eyes are contaminated, irrigate with water and seek medical advice immediately.
- Since the product contains flammable materials, keep away from sparks and open flames.
- No smoking should be permitted in the area.
Packaging & Availability
- Packaging
Two Pack Product.