Products

Camie® 563 High Strength Fast Tack Spray Adhesive Low VOC is a transparent and pressure sensitive. It provides instant tack, is repositionable, has a web-spray pattern and offers the user a low soak in with a high bond strength. Due to this product’s low soak-in characteristics and high “green strength”, it is especially recommended when bonding polyethylene film to drywall, brick, and concrete block. It is also excellent for use in partitioning and isolating construction areas.

Camie® 513 Fast Tack Upholstery Adhesive Low VOC was developed to offer the user a product that is versatile to use on a wide range of substrates.

Camie® 380 Screen Printers' Adhesive is specifically designed as a pressure-sensitive pallet adhesive that does not stain, offers quick tack, has low soak-in and will not wrinkle fine materials. Camie® 380 remains pressure-sensitive for an extended period of time. It is excellent for making short-term bonds and releasing from the garment.

Camie® 313B Fast Tack Upholstery Adhesive - Bulk is formulated for use in the foam and fabric trade for a quick tack, strong bond and a soft glue line. It works well to affix urethane foam, fabric and paper to themselves or to metal, wood, etc. Camie® 313B can be used with either the 118 SPRAY GUN or conventional air operated equipment.

Camie® 393 Headliner, Trim & Laminating Adhesive is formulated to bond substrates that require either high bond strength and/or need elevated temperature resistance. Camie® 393 also exhibits excellent green strength and water resistance. Both substrates to be bonded must be sprayed. These substrates can be joined as quickly as 10 seconds - 2 minutes depending on atmospheric conditions; make sure adhesive is tacky to the touch. Maximum open time before bonding is 15 minutes depending on how porous of a substrate is being used; make sure the adhesive is still tacky before bonding. If the adhesive has gone dead, reapply before joining the two substrates together. It is an Aerosol Adhesive.

Camie® 575 Screen Printers’ Flash Cure Adhesive Low VOC is recommended to the textile screen printer who is using a flash curing technique on the ink. Camie® 575 is particularly suited for the rapid heat cycles encountered in this process.

Camie® 300 General Purpose Spray Adhesive was especially formulated to bond paper, cardboard, fabric, leather, foil, fiberglass to metal, wood, and a variety of other substrates. It is especially useful in the screen print, pool table, and sewing industries. Camie® 300 is essentially colorless and is an Aerosol Adhesive. It offers quick tack and produces bonds that may be temporary or permanent.

Camie® 385 Webbing Screen Printers' Adhesive is a clear pressure-sensitive webbing adhesive that will not wrinkle the work while in use. Camie® 385 is specifically designed for fleece and other high density garments. It is an Aerosol Adhesive.

Camie® 580 Screen Printers’ Adhesive is a clear, pressure-sensitive adhesive that provides the user with quick tack. When properly applied, it will not transfer and will not wrinkle the work in use. Simply spray the pallet lightly for the temporary bonds needed for textile screen printing.

Camie® 500 General Purpose Spray Adhesive provides temporary or permanent bonds.

Camie® 343 Construction Adhesive is a fast tack, fast grab, low soak-in adhesive. It was especially formulated to bond polyethylene to itself, concrete block, wood, and many other hard-to-bond surfaces. Camie® 343 was developed for the floor covering industry as a well-rounded, general purpose adhesive for carpet and pads. It is tinted blue so the user can readily see where it has been applied. It may also be used to bond paper, cardboard, fabric, urethane foam, foil, metal, wood, and most plastics to themselves and a variety of other substrates. Camie® 343 may be used either for a permanent or temporary bond.

Camie® 375B Screen Printers' Flash Cure Adhesive - Bulk is specifically designed for the screen print industry. Camie® 375 holds most textile products, including fleece garments and is a clear mist spray particularly suited for the rapid heat cycles encountered in the flash cure process.