Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Features
- Powerful acid cleaner
- Economical
- Removes dulling oxidation
- Will not harm decals or painted lettering
- Restores aluminum and stainless steel
- Removes soils and road film
- Enhances appearance
- Cleans aluminum coils
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Directions
- Read all precautions before using. Wear gloves, eyeshields, and protective clothing when using.
- Recommended Dilutions
- Light Soil - Dilute 1 part Cantol Tech 110 to 50 parts water.
- Medium Soil - Dilute 1 part Cantol Tech 110 to 35 parts water.
- Heavy Soil - Dilute 1 part Cantol Tech 110 to 25 parts water.
- Wet Surface with clear water first and then apply solution starting at the bottom and working up.
- For large volume cleaning, apply with a pressure washer, compression sprayer, or brush. Use a coarse spray with adequate ventilation when spraying.
- For small jobs, dip the brush into the solution and apply to the surface.
- Wait for 3 to 5 minutes for Cantol Tech 110 to do the work. If necessary, agitate with a brush.
- Rinse with a pressure hose from the bottom up and then top-down. For small parts, hold under running water.
- When cleaning aluminum coils, do not direct pressure rinse into the coils. Just allow plenty of water to cascade over the fins to remove loosened debris.
- NOTE: Cantol Tech 110 will etch glass. If glass is contacted, wash off immediately with water. Do not use on galvanized metal or anodized aluminum surfaces.
- Applications
- Aluminum or stainless steel trucks
- Busses
- Tanks
- Air conditioning coils
- Tankers
- Railcars
- Equipment
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Acid Type | Hydrofluoric Acid | — | — |
Technical Details & Test Data
- Technical Data
- Effect on Glass - Etches. Avoid contact.
- Surfaces to Avoid - Galvanized metal or anodized aluminum.
Safety & Health
- Precautions
- Causes severe burns.
- Harmful or fatal if swallowed.
- Harmful if inhaled.
- May cause birth defects.
- Do not get in eyes, on the skin, or on clothing. Causes severe burns which may not be immediately painful or visible.
- Wear rubber gloves and eye protection.
- Hazardous liquid and vapor. Do not breathe vapor. Use with adequate ventilation. Keep container closed. Wash thoroughly after handling. Store out of sun and away from direct heat.
- Keep out of the reach of children.
- First Aid - In case of contact or suspicion of contact, seek prompt medical attention. Always have on hand a supply of magnesia paste (magnesium oxide and glycerin) or another ointment specific for hydrofluoric acid burns.
- Skin - Immediately flush with large quantities of cool water while removing contaminated clothing and shoes until acid is removed (up to 3-4 hours or until medical attention is obtained), paying particular attention to skin under nails.
- In case medical attention is delayed, apply a mixture of Glycerin with either Magnesium Oxide or milk of magnesia. Seek medical attention.
- Eyes - Immediately flush with cool water for 15 - 30 minutes; prompt medical attention is absolutely necessary.
- Inhalation - Remove to fresh air.
- Ingestion - If swallowed, do not induce vomiting. Give large quantities of water. Immediately call a physician.