Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Waterproof
- Low application temperature
- Professional use
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Product Use
For the Exterior or Interior Installation of:
- Wood subfloors, plywood, paneling, fiber composition boards, treated lumber, metal and masonry board.
- Not for use on polystyrene foams.
- Professional Use Only.
- Coverage
Coverage per 30 oz. Cartridge:
- 90 linear feet using a 1/4" bead.
- 40 linear feet using a 3/8" bead.
- Applications
- Apply at 40ºF or above.
- Ensure adequate ventilation when installing inside.
- Prepare all surfaces so they are clean and dry before you use this adhesive.
- Cut nozzle tip-off at an angle to make a 1/4" opening.
- Puncture the inner seal with a nail or sharp object.
- Apply with a standard caulking gun using a 1/4" bead along with all studs or support joists.
- Push panel into place.
- To speed up bond development and help hold warped panels: apply adhesive, set panel in place, then pull out and allow to air dry for about 5 minutes.
- Replace panel using firm pressure.
- Clean Up
- Tools may be cleaned with Capitol CL800 Adhesive Cleaner or safety solvent.
Properties
- Physical Properties
Value | Units | Test Method / Conditions | |
VOC (7.2% by Weight) | 139.0 | g/L | — |
Flash Point | 14 - 22 | °F | — |
Flammability | Extremely Flammable | — | — |
Packaging & Availability
- Available Sizes
- 30 Ounce.
Storage & Handling
- Handling
- Adequate ventilation is essential.
- Do not smoke.
- Keep away from heat, sparks, flames and all ignition sources.
- Turn off all electrical appliances.
- Wear solvent-resistant gloves and eye protection.
- Close container when not in use.
- Storage & Shelf Life
- Store and Transport: Protect from freezing.
- Shelf Life: One year in the unopened container.