Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Heat Resistant
- High Bond Strength
- Earth Friendly / Solvent Free
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Product Use
- To bond high-pressure decorative plastic laminates, wood and plastic veneers, paneling, carpet, leather, fabrics, rubber, paper, polyurethane foam and many other surfacing materials over wood, particleboard, plaster, metal and almost any smooth surface.
- Do not use on vinyl, plastic, copper or where silicone spray lubricants or release agents for polyester molded products (sinks, vanities, and bath fixtures) are being used.
- Product Notes
- Ensure substrate, material and adhesive are fully acclimated at the same temperature and humidity level expected during normal use (between 18 - 35 °C / 65 - 95 °F with relative humidity (RH) of no greater than 65%) 48 hours before installation.
- Maintain the temperature and humidity level during and after installation.
- Ensure adequate ventilation during installation.
- This product does not require thinning.
- Conduct a bond test before application.
- Coverage
- Up to 380 ft2 (190 ft2 of bonded material) per 1 gallon.
- Applications
- Adequate ventilation is essential.
- Apply adhesive with brush/roller to both surfaces.
- Allow drying (adhesive will feel tacky and appear glossy).
- Bring both surfaces together in exact placement.
- Bonds on contact, therefore, repositioning will not be possible.
- Apply pressure to ensure full contact and maximum bond strength.
- Clean Up
- Fresh adhesive: Warm soapy water.
- Dry adhesive: Mineral spirits sparingly with a clean, white, cotton cloth.
- Do not pour cleaner directly onto the flooring.
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Open Time (70°F, Relative Humidity 50%, Until Dry) | 30.0 | minutes | - |
Regulatory & Compliance
- Compliance
- This product complies with the South Coast Air Quality Management District VOC requirements.
- This product contains less than the maximum of 80 g/L.
Packaging & Availability
- Available Sizes
- 1-Gallon
- 1-Quart
- 1-Pint
Storage & Handling
- Storage & Shelf Life
- Storage & Transport: Store in a cool, dry place, protect from freezing.
- Shelf life: 1 year in unopened container.