Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Good tack
- Spread easily
- Water clean up
- This product is protected by AMP Guard®, an anti-microbial protection system that inhibits the growth of mold, mildew and odor-causing bacteria in both wet and dry adhesive.
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Limitations
- For interior use only.
- Protect from freezing.
- Instructions for Use
- Condition adhesive and materials to 65°F and 35% - 65% relative humidity, 48 hours prior to and after installation.
- Sweep the floor and remove any dirt or debris prior to installation.
- Make sure the floor is free from grease, oil, paint or another contaminant that will interfere with the bond of the adhesive.
- Spread adhesive with the appropriate trowel.
- Allow adhesive to flash for 15 minutes.
- Apply only as much adhesive that can be installed within 45 minutes.
- Inspect every piece for defects prior to placing it into the adhesive.
- Clean up the wet adhesive with a white cloth and soap and water.
- Dried adhesive residue can be removed with mineral spirits.
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Flammability | Non-Flammable | - | - |
| Open Time | 15 - 30 | minutes | - |
| Working Time | 45.0 | minutes | - |
Packaging & Availability
- Packaging
- 4-Gallon
Storage & Handling
- Shelf Life
- One year in closed container.