Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Benefits
- Low VOC content
- Easy to apply
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Typical Uses
- Business machines
- Decorative metal
- Metal furniture
- Application
Thoroughly mix the paint prior to application. Apply a uniform coating to the specified substrate. Brushing, rolling and dipping are not recommended. See Surface Preparation and Priming section for further instructions.
- Cleanup
Clean up should be done as soon as possible. Air quality regulations may limit allowable emissions from cleaning operations.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Gloss | High, Semi And Flat | ° | - |
| Flash Point | 24.0 | °F | TCC |
| Viscosity (78°F) | 25 - 30 | " | Zahn Range (#3) |
| Recommended DFT | 1.0 - 1.5 | mils | - |
| Coverage (65% TE, 1mil DFT ) | 850.0 | ft²/gal | - |
| VOC | 420.0 | g/l | - |
| Volume Solids | 49 - 53 | % | - |
| Conductivity | 10 - 30 | microamps | - |
Regulatory & Compliance
- Certifications & Compliance
- Regulatory & Compliance
RoHS / WEEE Compliant
Technical Details & Test Data
- Cured Film Properties
Testing conducted on 9708-10 semi-gloss white at 1.5 mils DFT (Dry Film Thickness) over 20 gage Bonderite 1000 test panel, cured 20’ at 350°F.
- Trouble Shooting
PROBLEM CAUSE REMEDY Bubbles and blisters Gas entrapment Add 1 oz/gal of SB-09 Paint spatter Spray tip obstructed Clean air cap and fluid nozzle with Acetone. Runs and sags Paint too wet Apply further away from part while applying, speed up rate of application. Dry spray Paint too dry Apply closer to part while applying. Slow down rate of application.
Safety & Health
- Safety
- Contains organic solvents. Use with adequate ventilation - do not breath vapors or spray mists. If component TLVs are exceeded, a NIOSH-approved air-supplied respirator is advised. See MSDS for TLV information.
- Contents are extremely flammable and are under pressure. Do not puncture or incinerate. Keep from heat, sparks or open flame. Exposure to heat may cause bursting.
- Allergic reactions are possible. Avoid use by persons with respiratory problems. Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling.
- Eye contact - flush immediately with plenty of water for at least 15 min. and get medical attention.
- Skin contact - wash thoroughly with soap and water for 5 minutes.
- If swallowed, do not induce vomiting and get medical attention immediately. Inhalation, remove to fresh air.
Storage & Handling
- Shelf Life
1 year from date of manufacture on the label.