Cast-Coat Inc. CC3-208 Clear

Identification & Functionality

Chemical Family: Epoxy & Epoxy Derivatives
Product Type: Epoxy Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Protective Coatings

Features & Benefits

Ready-to-Use Product Features: Chemical Resistant,
General Purpose,
Water Resistant

Applications & Uses

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Packaging & Assembly
Electronics Coatings
Application Method: Brush,
Dip Coating,
Spray
Cure Method: Air Dry
Cure Schedule: H-1 Hardener: Mix ratio of 11 parts H-1 Hardener per 100 parts CC3-208 by weight. (ie. 11 grams of H-1 Hardener and 100 grams of CC3-208 for a total mix of 111 grams) Cure can be achieved at room temperature within 6 to 24 hours. A heat cure of 2 to 4 hours at 65’ C is recommended.
Mixing Instructions: Stir the CC3-208 thoroughly in it’s shipping container to insure a uniform consistency. Weigh out the desired amount of resin in a clean container. Add the proper amount of hardener accurately by weight in the proper proportion as specified above. Mix thoroughly. Apply by brush, dip or spray to a clean surface. If more than one coat is applied, allow the resin to gel between coats. Use in a well ventilated area and avoid breathing fumes and avoid contact with eyes and skin.

Properties

	Value	Units	Test Method / Conditions
Izod Impact (of Notch)	1.2	ft lbs/in	-
Linear Shrinkage	0.01	in/in	-
Service Temperature (Continuous)	-65 - 100	°C	-
Service Temperature (Intermittent)	-100 - 150	°C	-
Tensile Elongation (Yield)	8 - 10	%	-
Tensile Strength (25°C)	8000.0	psi	-
Water Absorption (10 days, 25°C)	0.39	%	-

	Value	Units	Test Method / Conditions
Coefficient of Thermal Expansion	50 x 10^(-6)	in/in/’C	-
Thermal Conductivity	0.21	W/mK	-
Thermal Resistance	182.0	°C in/watt	-

	Value	Units	Test Method / Conditions
Specific Gravity (Uncatalyzed, 25°C)	1.0 - 1.1	-	-
Viscosity (Uncatalyzed, 25°C)	150 - 250	cps	-

Storage & Handling

Knowde Enhanced TDS